// =================================================================
//
//                           * WARNING *
//
//                    This file is generated!
//
//  Changes made to this file will be overwritten. If changes are
//  required to the generated code, the service_crategen project
//  must be updated to generate the changes.
//
// =================================================================

use std::error::Error;
use std::fmt;

#[allow(warnings)]
use futures::future;
use futures::Future;
use rusoto_core::credential::ProvideAwsCredentials;
use rusoto_core::region;
use rusoto_core::request::{BufferedHttpResponse, DispatchSignedRequest};
use rusoto_core::{Client, RusotoError, RusotoFuture};

use rusoto_core::param::{Params, ServiceParams};
use rusoto_core::proto::xml::error::*;
use rusoto_core::proto::xml::util::{
    characters, deserialize_elements, end_element, find_start_element, peek_at_name, skip_tree,
    start_element,
};
use rusoto_core::proto::xml::util::{Next, Peek, XmlParseError, XmlResponse};
use rusoto_core::signature::SignedRequest;
use serde_urlencoded;
use std::str::FromStr;
use xml::reader::ParserConfig;
use xml::EventReader;

struct AccessKeyIdTypeDeserializer;
impl AccessKeyIdTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct AccessKeySecretTypeDeserializer;
impl AccessKeySecretTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct AccountTypeDeserializer;
impl AccountTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct ArnTypeDeserializer;
impl ArnTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
#[derive(Default, Debug, Clone, PartialEq)]
pub struct AssumeRoleRequest {
    /// <p><p>The duration, in seconds, of the role session. The value can range from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. If you specify a value higher than this setting, the operation fails. For example, if you specify a session duration of 12 hours, but your administrator set the maximum session duration to 6 hours, your operation fails. To learn how to view the maximum value for your role, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session">View the Maximum Session Duration Setting for a Role</a> in the <i>IAM User Guide</i>.</p> <p>By default, the value is set to <code>3600</code> seconds. </p> <note> <p>The <code>DurationSeconds</code> parameter is separate from the duration of a console session that you might request using the returned credentials. The request to the federation endpoint for a console sign-in token takes a <code>SessionDuration</code> parameter that specifies the maximum length of the console session. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html">Creating a URL that Enables Federated Users to Access the AWS Management Console</a> in the <i>IAM User Guide</i>.</p> </note></p>
    pub duration_seconds: Option<i64>,
    /// <p>A unique identifier that might be required when you assume a role in another account. If the administrator of the account to which the role belongs provided you with an external ID, then provide that value in the <code>ExternalId</code> parameter. This value can be any string, such as a passphrase or account number. A cross-account role is usually set up to trust everyone in an account. Therefore, the administrator of the trusting account might send an external ID to the administrator of the trusted account. That way, only someone with the ID can assume the role, rather than everyone in the account. For more information about the external ID, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-user_externalid.html">How to Use an External ID When Granting Access to Your AWS Resources to a Third Party</a> in the <i>IAM User Guide</i>.</p> <p>The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@:/-</p>
    pub external_id: Option<String>,
    /// <p><p>An IAM policy in JSON format that you want to use as an inline session policy.</p> <p>This parameter is optional. Passing policies to this operation returns new temporary credentials. The resulting session&#39;s permissions are the intersection of the role&#39;s identity-based policy and the session policies. You can use the role&#39;s temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <p>The plain text that you use for both inline and managed session policies shouldn&#39;t exceed 2048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), and carriage return (\u000D) characters.</p> <note> <p>The characters in this parameter count towards the 2048 character session policy guideline. However, an AWS conversion compresses the session policies into a packed binary format that has a separate limit. This is the enforced limit. The <code>PackedPolicySize</code> response element indicates by percentage how close the policy is to the upper size limit.</p> </note></p>
    pub policy: Option<String>,
    /// <p>The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as managed session policies. The policies must exist in the same account as the role.</p> <p>This parameter is optional. You can provide up to 10 managed policy ARNs. However, the plain text that you use for both inline and managed session policies shouldn't exceed 2048 characters. For more information about ARNs, see <a href="general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and AWS Service Namespaces</a> in the AWS General Reference.</p> <note> <p>The characters in this parameter count towards the 2048 character session policy guideline. However, an AWS conversion compresses the session policies into a packed binary format that has a separate limit. This is the enforced limit. The <code>PackedPolicySize</code> response element indicates by percentage how close the policy is to the upper size limit.</p> </note> <p>Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p>
    pub policy_arns: Option<Vec<PolicyDescriptorType>>,
    /// <p>The Amazon Resource Name (ARN) of the role to assume.</p>
    pub role_arn: String,
    /// <p>An identifier for the assumed role session.</p> <p>Use the role session name to uniquely identify a session when the same role is assumed by different principals or for different reasons. In cross-account scenarios, the role session name is visible to, and can be logged by the account that owns the role. The role session name is also used in the ARN of the assumed role principal. This means that subsequent cross-account API requests that use the temporary security credentials will expose the role session name to the external account in their AWS CloudTrail logs.</p> <p>The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@-</p>
    pub role_session_name: String,
    /// <p>The identification number of the MFA device that is associated with the user who is making the <code>AssumeRole</code> call. Specify this value if the trust policy of the role being assumed includes a condition that requires MFA authentication. The value is either the serial number for a hardware device (such as <code>GAHT12345678</code>) or an Amazon Resource Name (ARN) for a virtual device (such as <code>arn:aws:iam::123456789012:mfa/user</code>).</p> <p>The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@-</p>
    pub serial_number: Option<String>,
    /// <p>The value provided by the MFA device, if the trust policy of the role being assumed requires MFA (that is, if the policy includes a condition that tests for MFA). If the role being assumed requires MFA and if the <code>TokenCode</code> value is missing or expired, the <code>AssumeRole</code> call returns an "access denied" error.</p> <p>The format for this parameter, as described by its regex pattern, is a sequence of six numeric digits.</p>
    pub token_code: Option<String>,
}

/// Serialize `AssumeRoleRequest` contents to a `SignedRequest`.
struct AssumeRoleRequestSerializer;
impl AssumeRoleRequestSerializer {
    fn serialize(params: &mut Params, name: &str, obj: &AssumeRoleRequest) {
        let mut prefix = name.to_string();
        if prefix != "" {
            prefix.push_str(".");
        }

        if let Some(ref field_value) = obj.duration_seconds {
            params.put(&format!("{}{}", prefix, "DurationSeconds"), &field_value);
        }
        if let Some(ref field_value) = obj.external_id {
            params.put(&format!("{}{}", prefix, "ExternalId"), &field_value);
        }
        if let Some(ref field_value) = obj.policy {
            params.put(&format!("{}{}", prefix, "Policy"), &field_value);
        }
        if let Some(ref field_value) = obj.policy_arns {
            PolicyDescriptorListTypeSerializer::serialize(
                params,
                &format!("{}{}", prefix, "PolicyArns"),
                field_value,
            );
        }
        params.put(&format!("{}{}", prefix, "RoleArn"), &obj.role_arn);
        params.put(
            &format!("{}{}", prefix, "RoleSessionName"),
            &obj.role_session_name,
        );
        if let Some(ref field_value) = obj.serial_number {
            params.put(&format!("{}{}", prefix, "SerialNumber"), &field_value);
        }
        if let Some(ref field_value) = obj.token_code {
            params.put(&format!("{}{}", prefix, "TokenCode"), &field_value);
        }
    }
}

/// <p>Contains the response to a successful <a>AssumeRole</a> request, including temporary AWS credentials that can be used to make AWS requests. </p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct AssumeRoleResponse {
    /// <p>The Amazon Resource Name (ARN) and the assumed role ID, which are identifiers that you can use to refer to the resulting temporary security credentials. For example, you can reference these credentials as a principal in a resource-based policy by using the ARN or assumed role ID. The ARN and ID include the <code>RoleSessionName</code> that you specified when you called <code>AssumeRole</code>. </p>
    pub assumed_role_user: Option<AssumedRoleUser>,
    /// <p><p>The temporary security credentials, which include an access key ID, a secret access key, and a security (or session) token.</p> <note> <p>The size of the security token that STS API operations return is not fixed. We strongly recommend that you make no assumptions about the maximum size.</p> </note></p>
    pub credentials: Option<Credentials>,
    /// <p>A percentage value that indicates the size of the policy in packed form. The service rejects any policy with a packed size greater than 100 percent, which means the policy exceeded the allowed space.</p>
    pub packed_policy_size: Option<i64>,
}

struct AssumeRoleResponseDeserializer;
impl AssumeRoleResponseDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<AssumeRoleResponse, XmlParseError> {
        deserialize_elements::<_, AssumeRoleResponse, _>(tag_name, stack, |name, stack, obj| {
            match name {
                "AssumedRoleUser" => {
                    obj.assumed_role_user = Some(AssumedRoleUserDeserializer::deserialize(
                        "AssumedRoleUser",
                        stack,
                    )?);
                }
                "Credentials" => {
                    obj.credentials =
                        Some(CredentialsDeserializer::deserialize("Credentials", stack)?);
                }
                "PackedPolicySize" => {
                    obj.packed_policy_size = Some(NonNegativeIntegerTypeDeserializer::deserialize(
                        "PackedPolicySize",
                        stack,
                    )?);
                }
                _ => skip_tree(stack),
            }
            Ok(())
        })
    }
}
#[derive(Default, Debug, Clone, PartialEq)]
pub struct AssumeRoleWithSAMLRequest {
    /// <p><p>The duration, in seconds, of the role session. Your role session lasts for the duration that you specify for the <code>DurationSeconds</code> parameter, or until the time specified in the SAML authentication response&#39;s <code>SessionNotOnOrAfter</code> value, whichever is shorter. You can provide a <code>DurationSeconds</code> value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. If you specify a value higher than this setting, the operation fails. For example, if you specify a session duration of 12 hours, but your administrator set the maximum session duration to 6 hours, your operation fails. To learn how to view the maximum value for your role, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session">View the Maximum Session Duration Setting for a Role</a> in the <i>IAM User Guide</i>.</p> <p>By default, the value is set to <code>3600</code> seconds. </p> <note> <p>The <code>DurationSeconds</code> parameter is separate from the duration of a console session that you might request using the returned credentials. The request to the federation endpoint for a console sign-in token takes a <code>SessionDuration</code> parameter that specifies the maximum length of the console session. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html">Creating a URL that Enables Federated Users to Access the AWS Management Console</a> in the <i>IAM User Guide</i>.</p> </note></p>
    pub duration_seconds: Option<i64>,
    /// <p><p>An IAM policy in JSON format that you want to use as an inline session policy.</p> <p>This parameter is optional. Passing policies to this operation returns new temporary credentials. The resulting session&#39;s permissions are the intersection of the role&#39;s identity-based policy and the session policies. You can use the role&#39;s temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>. </p> <p>The plain text that you use for both inline and managed session policies shouldn&#39;t exceed 2048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), and carriage return (\u000D) characters.</p> <note> <p>The characters in this parameter count towards the 2048 character session policy guideline. However, an AWS conversion compresses the session policies into a packed binary format that has a separate limit. This is the enforced limit. The <code>PackedPolicySize</code> response element indicates by percentage how close the policy is to the upper size limit.</p> </note></p>
    pub policy: Option<String>,
    /// <p>The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as managed session policies. The policies must exist in the same account as the role.</p> <p>This parameter is optional. You can provide up to 10 managed policy ARNs. However, the plain text that you use for both inline and managed session policies shouldn't exceed 2048 characters. For more information about ARNs, see <a href="general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and AWS Service Namespaces</a> in the AWS General Reference.</p> <note> <p>The characters in this parameter count towards the 2048 character session policy guideline. However, an AWS conversion compresses the session policies into a packed binary format that has a separate limit. This is the enforced limit. The <code>PackedPolicySize</code> response element indicates by percentage how close the policy is to the upper size limit.</p> </note> <p>Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p>
    pub policy_arns: Option<Vec<PolicyDescriptorType>>,
    /// <p>The Amazon Resource Name (ARN) of the SAML provider in IAM that describes the IdP.</p>
    pub principal_arn: String,
    /// <p>The Amazon Resource Name (ARN) of the role that the caller is assuming.</p>
    pub role_arn: String,
    /// <p>The base-64 encoded SAML authentication response provided by the IdP.</p> <p>For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/create-role-saml-IdP-tasks.html">Configuring a Relying Party and Adding Claims</a> in the <i>IAM User Guide</i>. </p>
    pub saml_assertion: String,
}

/// Serialize `AssumeRoleWithSAMLRequest` contents to a `SignedRequest`.
struct AssumeRoleWithSAMLRequestSerializer;
impl AssumeRoleWithSAMLRequestSerializer {
    fn serialize(params: &mut Params, name: &str, obj: &AssumeRoleWithSAMLRequest) {
        let mut prefix = name.to_string();
        if prefix != "" {
            prefix.push_str(".");
        }

        if let Some(ref field_value) = obj.duration_seconds {
            params.put(&format!("{}{}", prefix, "DurationSeconds"), &field_value);
        }
        if let Some(ref field_value) = obj.policy {
            params.put(&format!("{}{}", prefix, "Policy"), &field_value);
        }
        if let Some(ref field_value) = obj.policy_arns {
            PolicyDescriptorListTypeSerializer::serialize(
                params,
                &format!("{}{}", prefix, "PolicyArns"),
                field_value,
            );
        }
        params.put(&format!("{}{}", prefix, "PrincipalArn"), &obj.principal_arn);
        params.put(&format!("{}{}", prefix, "RoleArn"), &obj.role_arn);
        params.put(
            &format!("{}{}", prefix, "SAMLAssertion"),
            &obj.saml_assertion,
        );
    }
}

/// <p>Contains the response to a successful <a>AssumeRoleWithSAML</a> request, including temporary AWS credentials that can be used to make AWS requests. </p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct AssumeRoleWithSAMLResponse {
    /// <p>The identifiers for the temporary security credentials that the operation returns.</p>
    pub assumed_role_user: Option<AssumedRoleUser>,
    /// <p> The value of the <code>Recipient</code> attribute of the <code>SubjectConfirmationData</code> element of the SAML assertion. </p>
    pub audience: Option<String>,
    /// <p><p>The temporary security credentials, which include an access key ID, a secret access key, and a security (or session) token.</p> <note> <p>The size of the security token that STS API operations return is not fixed. We strongly recommend that you make no assumptions about the maximum size.</p> </note></p>
    pub credentials: Option<Credentials>,
    /// <p>The value of the <code>Issuer</code> element of the SAML assertion.</p>
    pub issuer: Option<String>,
    /// <p>A hash value based on the concatenation of the <code>Issuer</code> response value, the AWS account ID, and the friendly name (the last part of the ARN) of the SAML provider in IAM. The combination of <code>NameQualifier</code> and <code>Subject</code> can be used to uniquely identify a federated user. </p> <p>The following pseudocode shows how the hash value is calculated:</p> <p> <code>BASE64 ( SHA1 ( "https://example.com/saml" + "123456789012" + "/MySAMLIdP" ) )</code> </p>
    pub name_qualifier: Option<String>,
    /// <p>A percentage value that indicates the size of the policy in packed form. The service rejects any policy with a packed size greater than 100 percent, which means the policy exceeded the allowed space.</p>
    pub packed_policy_size: Option<i64>,
    /// <p>The value of the <code>NameID</code> element in the <code>Subject</code> element of the SAML assertion.</p>
    pub subject: Option<String>,
    /// <p> The format of the name ID, as defined by the <code>Format</code> attribute in the <code>NameID</code> element of the SAML assertion. Typical examples of the format are <code>transient</code> or <code>persistent</code>. </p> <p> If the format includes the prefix <code>urn:oasis:names:tc:SAML:2.0:nameid-format</code>, that prefix is removed. For example, <code>urn:oasis:names:tc:SAML:2.0:nameid-format:transient</code> is returned as <code>transient</code>. If the format includes any other prefix, the format is returned with no modifications.</p>
    pub subject_type: Option<String>,
}

struct AssumeRoleWithSAMLResponseDeserializer;
impl AssumeRoleWithSAMLResponseDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<AssumeRoleWithSAMLResponse, XmlParseError> {
        deserialize_elements::<_, AssumeRoleWithSAMLResponse, _>(
            tag_name,
            stack,
            |name, stack, obj| {
                match name {
                    "AssumedRoleUser" => {
                        obj.assumed_role_user = Some(AssumedRoleUserDeserializer::deserialize(
                            "AssumedRoleUser",
                            stack,
                        )?);
                    }
                    "Audience" => {
                        obj.audience = Some(AudienceDeserializer::deserialize("Audience", stack)?);
                    }
                    "Credentials" => {
                        obj.credentials =
                            Some(CredentialsDeserializer::deserialize("Credentials", stack)?);
                    }
                    "Issuer" => {
                        obj.issuer = Some(IssuerDeserializer::deserialize("Issuer", stack)?);
                    }
                    "NameQualifier" => {
                        obj.name_qualifier = Some(NameQualifierDeserializer::deserialize(
                            "NameQualifier",
                            stack,
                        )?);
                    }
                    "PackedPolicySize" => {
                        obj.packed_policy_size =
                            Some(NonNegativeIntegerTypeDeserializer::deserialize(
                                "PackedPolicySize",
                                stack,
                            )?);
                    }
                    "Subject" => {
                        obj.subject = Some(SubjectDeserializer::deserialize("Subject", stack)?);
                    }
                    "SubjectType" => {
                        obj.subject_type =
                            Some(SubjectTypeDeserializer::deserialize("SubjectType", stack)?);
                    }
                    _ => skip_tree(stack),
                }
                Ok(())
            },
        )
    }
}
#[derive(Default, Debug, Clone, PartialEq)]
pub struct AssumeRoleWithWebIdentityRequest {
    /// <p><p>The duration, in seconds, of the role session. The value can range from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. If you specify a value higher than this setting, the operation fails. For example, if you specify a session duration of 12 hours, but your administrator set the maximum session duration to 6 hours, your operation fails. To learn how to view the maximum value for your role, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session">View the Maximum Session Duration Setting for a Role</a> in the <i>IAM User Guide</i>.</p> <p>By default, the value is set to <code>3600</code> seconds. </p> <note> <p>The <code>DurationSeconds</code> parameter is separate from the duration of a console session that you might request using the returned credentials. The request to the federation endpoint for a console sign-in token takes a <code>SessionDuration</code> parameter that specifies the maximum length of the console session. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_enable-console-custom-url.html">Creating a URL that Enables Federated Users to Access the AWS Management Console</a> in the <i>IAM User Guide</i>.</p> </note></p>
    pub duration_seconds: Option<i64>,
    /// <p><p>An IAM policy in JSON format that you want to use as an inline session policy.</p> <p>This parameter is optional. Passing policies to this operation returns new temporary credentials. The resulting session&#39;s permissions are the intersection of the role&#39;s identity-based policy and the session policies. You can use the role&#39;s temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <p>The plain text that you use for both inline and managed session policies shouldn&#39;t exceed 2048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), and carriage return (\u000D) characters.</p> <note> <p>The characters in this parameter count towards the 2048 character session policy guideline. However, an AWS conversion compresses the session policies into a packed binary format that has a separate limit. This is the enforced limit. The <code>PackedPolicySize</code> response element indicates by percentage how close the policy is to the upper size limit.</p> </note></p>
    pub policy: Option<String>,
    /// <p>The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as managed session policies. The policies must exist in the same account as the role.</p> <p>This parameter is optional. You can provide up to 10 managed policy ARNs. However, the plain text that you use for both inline and managed session policies shouldn't exceed 2048 characters. For more information about ARNs, see <a href="general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and AWS Service Namespaces</a> in the AWS General Reference.</p> <note> <p>The characters in this parameter count towards the 2048 character session policy guideline. However, an AWS conversion compresses the session policies into a packed binary format that has a separate limit. This is the enforced limit. The <code>PackedPolicySize</code> response element indicates by percentage how close the policy is to the upper size limit.</p> </note> <p>Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p>
    pub policy_arns: Option<Vec<PolicyDescriptorType>>,
    /// <p>The fully qualified host component of the domain name of the identity provider.</p> <p>Specify this value only for OAuth 2.0 access tokens. Currently <code>www.amazon.com</code> and <code>graph.facebook.com</code> are the only supported identity providers for OAuth 2.0 access tokens. Do not include URL schemes and port numbers.</p> <p>Do not specify this value for OpenID Connect ID tokens.</p>
    pub provider_id: Option<String>,
    /// <p>The Amazon Resource Name (ARN) of the role that the caller is assuming.</p>
    pub role_arn: String,
    /// <p>An identifier for the assumed role session. Typically, you pass the name or identifier that is associated with the user who is using your application. That way, the temporary security credentials that your application will use are associated with that user. This session name is included as part of the ARN and assumed role ID in the <code>AssumedRoleUser</code> response element.</p> <p>The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@-</p>
    pub role_session_name: String,
    /// <p>The OAuth 2.0 access token or OpenID Connect ID token that is provided by the identity provider. Your application must get this token by authenticating the user who is using your application with a web identity provider before the application makes an <code>AssumeRoleWithWebIdentity</code> call. </p>
    pub web_identity_token: String,
}

/// Serialize `AssumeRoleWithWebIdentityRequest` contents to a `SignedRequest`.
struct AssumeRoleWithWebIdentityRequestSerializer;
impl AssumeRoleWithWebIdentityRequestSerializer {
    fn serialize(params: &mut Params, name: &str, obj: &AssumeRoleWithWebIdentityRequest) {
        let mut prefix = name.to_string();
        if prefix != "" {
            prefix.push_str(".");
        }

        if let Some(ref field_value) = obj.duration_seconds {
            params.put(&format!("{}{}", prefix, "DurationSeconds"), &field_value);
        }
        if let Some(ref field_value) = obj.policy {
            params.put(&format!("{}{}", prefix, "Policy"), &field_value);
        }
        if let Some(ref field_value) = obj.policy_arns {
            PolicyDescriptorListTypeSerializer::serialize(
                params,
                &format!("{}{}", prefix, "PolicyArns"),
                field_value,
            );
        }
        if let Some(ref field_value) = obj.provider_id {
            params.put(&format!("{}{}", prefix, "ProviderId"), &field_value);
        }
        params.put(&format!("{}{}", prefix, "RoleArn"), &obj.role_arn);
        params.put(
            &format!("{}{}", prefix, "RoleSessionName"),
            &obj.role_session_name,
        );
        params.put(
            &format!("{}{}", prefix, "WebIdentityToken"),
            &obj.web_identity_token,
        );
    }
}

/// <p>Contains the response to a successful <a>AssumeRoleWithWebIdentity</a> request, including temporary AWS credentials that can be used to make AWS requests. </p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct AssumeRoleWithWebIdentityResponse {
    /// <p>The Amazon Resource Name (ARN) and the assumed role ID, which are identifiers that you can use to refer to the resulting temporary security credentials. For example, you can reference these credentials as a principal in a resource-based policy by using the ARN or assumed role ID. The ARN and ID include the <code>RoleSessionName</code> that you specified when you called <code>AssumeRole</code>. </p>
    pub assumed_role_user: Option<AssumedRoleUser>,
    /// <p>The intended audience (also known as client ID) of the web identity token. This is traditionally the client identifier issued to the application that requested the web identity token.</p>
    pub audience: Option<String>,
    /// <p><p>The temporary security credentials, which include an access key ID, a secret access key, and a security token.</p> <note> <p>The size of the security token that STS API operations return is not fixed. We strongly recommend that you make no assumptions about the maximum size.</p> </note></p>
    pub credentials: Option<Credentials>,
    /// <p>A percentage value that indicates the size of the policy in packed form. The service rejects any policy with a packed size greater than 100 percent, which means the policy exceeded the allowed space.</p>
    pub packed_policy_size: Option<i64>,
    /// <p> The issuing authority of the web identity token presented. For OpenID Connect ID tokens, this contains the value of the <code>iss</code> field. For OAuth 2.0 access tokens, this contains the value of the <code>ProviderId</code> parameter that was passed in the <code>AssumeRoleWithWebIdentity</code> request.</p>
    pub provider: Option<String>,
    /// <p>The unique user identifier that is returned by the identity provider. This identifier is associated with the <code>WebIdentityToken</code> that was submitted with the <code>AssumeRoleWithWebIdentity</code> call. The identifier is typically unique to the user and the application that acquired the <code>WebIdentityToken</code> (pairwise identifier). For OpenID Connect ID tokens, this field contains the value returned by the identity provider as the token's <code>sub</code> (Subject) claim. </p>
    pub subject_from_web_identity_token: Option<String>,
}

struct AssumeRoleWithWebIdentityResponseDeserializer;
impl AssumeRoleWithWebIdentityResponseDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<AssumeRoleWithWebIdentityResponse, XmlParseError> {
        deserialize_elements::<_, AssumeRoleWithWebIdentityResponse, _>(
            tag_name,
            stack,
            |name, stack, obj| {
                match name {
                    "AssumedRoleUser" => {
                        obj.assumed_role_user = Some(AssumedRoleUserDeserializer::deserialize(
                            "AssumedRoleUser",
                            stack,
                        )?);
                    }
                    "Audience" => {
                        obj.audience = Some(AudienceDeserializer::deserialize("Audience", stack)?);
                    }
                    "Credentials" => {
                        obj.credentials =
                            Some(CredentialsDeserializer::deserialize("Credentials", stack)?);
                    }
                    "PackedPolicySize" => {
                        obj.packed_policy_size =
                            Some(NonNegativeIntegerTypeDeserializer::deserialize(
                                "PackedPolicySize",
                                stack,
                            )?);
                    }
                    "Provider" => {
                        obj.provider = Some(IssuerDeserializer::deserialize("Provider", stack)?);
                    }
                    "SubjectFromWebIdentityToken" => {
                        obj.subject_from_web_identity_token =
                            Some(WebIdentitySubjectTypeDeserializer::deserialize(
                                "SubjectFromWebIdentityToken",
                                stack,
                            )?);
                    }
                    _ => skip_tree(stack),
                }
                Ok(())
            },
        )
    }
}
struct AssumedRoleIdTypeDeserializer;
impl AssumedRoleIdTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
/// <p>The identifiers for the temporary security credentials that the operation returns.</p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct AssumedRoleUser {
    /// <p>The ARN of the temporary security credentials that are returned from the <a>AssumeRole</a> action. For more information about ARNs and how to use them in policies, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_identifiers.html">IAM Identifiers</a> in <i>Using IAM</i>. </p>
    pub arn: String,
    /// <p>A unique identifier that contains the role ID and the role session name of the role that is being assumed. The role ID is generated by AWS when the role is created.</p>
    pub assumed_role_id: String,
}

struct AssumedRoleUserDeserializer;
impl AssumedRoleUserDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<AssumedRoleUser, XmlParseError> {
        deserialize_elements::<_, AssumedRoleUser, _>(tag_name, stack, |name, stack, obj| {
            match name {
                "Arn" => {
                    obj.arn = ArnTypeDeserializer::deserialize("Arn", stack)?;
                }
                "AssumedRoleId" => {
                    obj.assumed_role_id =
                        AssumedRoleIdTypeDeserializer::deserialize("AssumedRoleId", stack)?;
                }
                _ => skip_tree(stack),
            }
            Ok(())
        })
    }
}
struct AudienceDeserializer;
impl AudienceDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
/// <p>AWS credentials for API authentication.</p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct Credentials {
    /// <p>The access key ID that identifies the temporary security credentials.</p>
    pub access_key_id: String,
    /// <p>The date on which the current credentials expire.</p>
    pub expiration: String,
    /// <p>The secret access key that can be used to sign requests.</p>
    pub secret_access_key: String,
    /// <p>The token that users must pass to the service API to use the temporary credentials.</p>
    pub session_token: String,
}

struct CredentialsDeserializer;
impl CredentialsDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<Credentials, XmlParseError> {
        deserialize_elements::<_, Credentials, _>(tag_name, stack, |name, stack, obj| {
            match name {
                "AccessKeyId" => {
                    obj.access_key_id =
                        AccessKeyIdTypeDeserializer::deserialize("AccessKeyId", stack)?;
                }
                "Expiration" => {
                    obj.expiration = DateTypeDeserializer::deserialize("Expiration", stack)?;
                }
                "SecretAccessKey" => {
                    obj.secret_access_key =
                        AccessKeySecretTypeDeserializer::deserialize("SecretAccessKey", stack)?;
                }
                "SessionToken" => {
                    obj.session_token = TokenTypeDeserializer::deserialize("SessionToken", stack)?;
                }
                _ => skip_tree(stack),
            }
            Ok(())
        })
    }
}
struct DateTypeDeserializer;
impl DateTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
#[derive(Default, Debug, Clone, PartialEq)]
pub struct DecodeAuthorizationMessageRequest {
    /// <p>The encoded message that was returned with the response.</p>
    pub encoded_message: String,
}

/// Serialize `DecodeAuthorizationMessageRequest` contents to a `SignedRequest`.
struct DecodeAuthorizationMessageRequestSerializer;
impl DecodeAuthorizationMessageRequestSerializer {
    fn serialize(params: &mut Params, name: &str, obj: &DecodeAuthorizationMessageRequest) {
        let mut prefix = name.to_string();
        if prefix != "" {
            prefix.push_str(".");
        }

        params.put(
            &format!("{}{}", prefix, "EncodedMessage"),
            &obj.encoded_message,
        );
    }
}

/// <p>A document that contains additional information about the authorization status of a request from an encoded message that is returned in response to an AWS request.</p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct DecodeAuthorizationMessageResponse {
    /// <p>An XML document that contains the decoded message.</p>
    pub decoded_message: Option<String>,
}

struct DecodeAuthorizationMessageResponseDeserializer;
impl DecodeAuthorizationMessageResponseDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<DecodeAuthorizationMessageResponse, XmlParseError> {
        deserialize_elements::<_, DecodeAuthorizationMessageResponse, _>(
            tag_name,
            stack,
            |name, stack, obj| {
                match name {
                    "DecodedMessage" => {
                        obj.decoded_message = Some(DecodedMessageTypeDeserializer::deserialize(
                            "DecodedMessage",
                            stack,
                        )?);
                    }
                    _ => skip_tree(stack),
                }
                Ok(())
            },
        )
    }
}
struct DecodedMessageTypeDeserializer;
impl DecodedMessageTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct FederatedIdTypeDeserializer;
impl FederatedIdTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
/// <p>Identifiers for the federated user that is associated with the credentials.</p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct FederatedUser {
    /// <p>The ARN that specifies the federated user that is associated with the credentials. For more information about ARNs and how to use them in policies, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_identifiers.html">IAM Identifiers</a> in <i>Using IAM</i>. </p>
    pub arn: String,
    /// <p>The string that identifies the federated user associated with the credentials, similar to the unique ID of an IAM user.</p>
    pub federated_user_id: String,
}

struct FederatedUserDeserializer;
impl FederatedUserDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<FederatedUser, XmlParseError> {
        deserialize_elements::<_, FederatedUser, _>(tag_name, stack, |name, stack, obj| {
            match name {
                "Arn" => {
                    obj.arn = ArnTypeDeserializer::deserialize("Arn", stack)?;
                }
                "FederatedUserId" => {
                    obj.federated_user_id =
                        FederatedIdTypeDeserializer::deserialize("FederatedUserId", stack)?;
                }
                _ => skip_tree(stack),
            }
            Ok(())
        })
    }
}
#[derive(Default, Debug, Clone, PartialEq)]
pub struct GetCallerIdentityRequest {}

/// Serialize `GetCallerIdentityRequest` contents to a `SignedRequest`.
struct GetCallerIdentityRequestSerializer;
impl GetCallerIdentityRequestSerializer {
    fn serialize(_params: &mut Params, name: &str, _obj: &GetCallerIdentityRequest) {
        let mut prefix = name.to_string();
        if prefix != "" {
            prefix.push_str(".");
        }
    }
}

/// <p>Contains the response to a successful <a>GetCallerIdentity</a> request, including information about the entity making the request.</p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct GetCallerIdentityResponse {
    /// <p>The AWS account ID number of the account that owns or contains the calling entity.</p>
    pub account: Option<String>,
    /// <p>The AWS ARN associated with the calling entity.</p>
    pub arn: Option<String>,
    /// <p>The unique identifier of the calling entity. The exact value depends on the type of entity that is making the call. The values returned are those listed in the <b>aws:userid</b> column in the <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_variables.html#principaltable">Principal table</a> found on the <b>Policy Variables</b> reference page in the <i>IAM User Guide</i>.</p>
    pub user_id: Option<String>,
}

struct GetCallerIdentityResponseDeserializer;
impl GetCallerIdentityResponseDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<GetCallerIdentityResponse, XmlParseError> {
        deserialize_elements::<_, GetCallerIdentityResponse, _>(
            tag_name,
            stack,
            |name, stack, obj| {
                match name {
                    "Account" => {
                        obj.account = Some(AccountTypeDeserializer::deserialize("Account", stack)?);
                    }
                    "Arn" => {
                        obj.arn = Some(ArnTypeDeserializer::deserialize("Arn", stack)?);
                    }
                    "UserId" => {
                        obj.user_id = Some(UserIdTypeDeserializer::deserialize("UserId", stack)?);
                    }
                    _ => skip_tree(stack),
                }
                Ok(())
            },
        )
    }
}
#[derive(Default, Debug, Clone, PartialEq)]
pub struct GetFederationTokenRequest {
    /// <p>The duration, in seconds, that the session should last. Acceptable durations for federation sessions range from 900 seconds (15 minutes) to 129,600 seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions obtained using AWS account root user credentials are restricted to a maximum of 3,600 seconds (one hour). If the specified duration is longer than one hour, the session obtained by using root user credentials defaults to one hour.</p>
    pub duration_seconds: Option<i64>,
    /// <p>The name of the federated user. The name is used as an identifier for the temporary security credentials (such as <code>Bob</code>). For example, you can reference the federated user name in a resource-based policy, such as in an Amazon S3 bucket policy.</p> <p>The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@-</p>
    pub name: String,
    /// <p><p>An IAM policy in JSON format that you want to use as an inline session policy.</p> <p>You must pass an inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policy</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies.</p> <p>This parameter is optional. However, if you do not pass any session policies, then the resulting federated user session has no permissions. The only exception is when the credentials are used to access a resource that has a resource-based policy that specifically references the federated user session in the <code>Principal</code> element of the policy.</p> <p>When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <p>The plain text that you use for both inline and managed session policies shouldn&#39;t exceed 2048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list (\u0020 through \u00FF). It can also include the tab (\u0009), linefeed (\u000A), and carriage return (\u000D) characters.</p> <note> <p>The characters in this parameter count towards the 2048 character session policy guideline. However, an AWS conversion compresses the session policies into a packed binary format that has a separate limit. This is the enforced limit. The <code>PackedPolicySize</code> response element indicates by percentage how close the policy is to the upper size limit.</p> </note></p>
    pub policy: Option<String>,
    /// <p><p>The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as a managed session policy. The policies must exist in the same account as the IAM user that is requesting federated access.</p> <p>You must pass an inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policy</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plain text that you use for both inline and managed session policies shouldn&#39;t exceed 2048 characters. You can provide up to 10 managed policy ARNs. For more information about ARNs, see <a href="general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and AWS Service Namespaces</a> in the AWS General Reference.</p> <p>This parameter is optional. However, if you do not pass any session policies, then the resulting federated user session has no permissions. The only exception is when the credentials are used to access a resource that has a resource-based policy that specifically references the federated user session in the <code>Principal</code> element of the policy.</p> <p>When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <note> <p>The characters in this parameter count towards the 2048 character session policy guideline. However, an AWS conversion compresses the session policies into a packed binary format that has a separate limit. This is the enforced limit. The <code>PackedPolicySize</code> response element indicates by percentage how close the policy is to the upper size limit.</p> </note></p>
    pub policy_arns: Option<Vec<PolicyDescriptorType>>,
}

/// Serialize `GetFederationTokenRequest` contents to a `SignedRequest`.
struct GetFederationTokenRequestSerializer;
impl GetFederationTokenRequestSerializer {
    fn serialize(params: &mut Params, name: &str, obj: &GetFederationTokenRequest) {
        let mut prefix = name.to_string();
        if prefix != "" {
            prefix.push_str(".");
        }

        if let Some(ref field_value) = obj.duration_seconds {
            params.put(&format!("{}{}", prefix, "DurationSeconds"), &field_value);
        }
        params.put(&format!("{}{}", prefix, "Name"), &obj.name);
        if let Some(ref field_value) = obj.policy {
            params.put(&format!("{}{}", prefix, "Policy"), &field_value);
        }
        if let Some(ref field_value) = obj.policy_arns {
            PolicyDescriptorListTypeSerializer::serialize(
                params,
                &format!("{}{}", prefix, "PolicyArns"),
                field_value,
            );
        }
    }
}

/// <p>Contains the response to a successful <a>GetFederationToken</a> request, including temporary AWS credentials that can be used to make AWS requests. </p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct GetFederationTokenResponse {
    /// <p><p>The temporary security credentials, which include an access key ID, a secret access key, and a security (or session) token.</p> <note> <p>The size of the security token that STS API operations return is not fixed. We strongly recommend that you make no assumptions about the maximum size.</p> </note></p>
    pub credentials: Option<Credentials>,
    /// <p>Identifiers for the federated user associated with the credentials (such as <code>arn:aws:sts::123456789012:federated-user/Bob</code> or <code>123456789012:Bob</code>). You can use the federated user's ARN in your resource-based policies, such as an Amazon S3 bucket policy. </p>
    pub federated_user: Option<FederatedUser>,
    /// <p>A percentage value indicating the size of the policy in packed form. The service rejects policies for which the packed size is greater than 100 percent of the allowed value.</p>
    pub packed_policy_size: Option<i64>,
}

struct GetFederationTokenResponseDeserializer;
impl GetFederationTokenResponseDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<GetFederationTokenResponse, XmlParseError> {
        deserialize_elements::<_, GetFederationTokenResponse, _>(
            tag_name,
            stack,
            |name, stack, obj| {
                match name {
                    "Credentials" => {
                        obj.credentials =
                            Some(CredentialsDeserializer::deserialize("Credentials", stack)?);
                    }
                    "FederatedUser" => {
                        obj.federated_user = Some(FederatedUserDeserializer::deserialize(
                            "FederatedUser",
                            stack,
                        )?);
                    }
                    "PackedPolicySize" => {
                        obj.packed_policy_size =
                            Some(NonNegativeIntegerTypeDeserializer::deserialize(
                                "PackedPolicySize",
                                stack,
                            )?);
                    }
                    _ => skip_tree(stack),
                }
                Ok(())
            },
        )
    }
}
#[derive(Default, Debug, Clone, PartialEq)]
pub struct GetSessionTokenRequest {
    /// <p>The duration, in seconds, that the credentials should remain valid. Acceptable durations for IAM user sessions range from 900 seconds (15 minutes) to 129,600 seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions for AWS account owners are restricted to a maximum of 3,600 seconds (one hour). If the duration is longer than one hour, the session for AWS account owners defaults to one hour.</p>
    pub duration_seconds: Option<i64>,
    /// <p>The identification number of the MFA device that is associated with the IAM user who is making the <code>GetSessionToken</code> call. Specify this value if the IAM user has a policy that requires MFA authentication. The value is either the serial number for a hardware device (such as <code>GAHT12345678</code>) or an Amazon Resource Name (ARN) for a virtual device (such as <code>arn:aws:iam::123456789012:mfa/user</code>). You can find the device for an IAM user by going to the AWS Management Console and viewing the user's security credentials. </p> <p>The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@:/-</p>
    pub serial_number: Option<String>,
    /// <p>The value provided by the MFA device, if MFA is required. If any policy requires the IAM user to submit an MFA code, specify this value. If MFA authentication is required, the user must provide a code when requesting a set of temporary security credentials. A user who fails to provide the code receives an "access denied" response when requesting resources that require MFA authentication.</p> <p>The format for this parameter, as described by its regex pattern, is a sequence of six numeric digits.</p>
    pub token_code: Option<String>,
}

/// Serialize `GetSessionTokenRequest` contents to a `SignedRequest`.
struct GetSessionTokenRequestSerializer;
impl GetSessionTokenRequestSerializer {
    fn serialize(params: &mut Params, name: &str, obj: &GetSessionTokenRequest) {
        let mut prefix = name.to_string();
        if prefix != "" {
            prefix.push_str(".");
        }

        if let Some(ref field_value) = obj.duration_seconds {
            params.put(&format!("{}{}", prefix, "DurationSeconds"), &field_value);
        }
        if let Some(ref field_value) = obj.serial_number {
            params.put(&format!("{}{}", prefix, "SerialNumber"), &field_value);
        }
        if let Some(ref field_value) = obj.token_code {
            params.put(&format!("{}{}", prefix, "TokenCode"), &field_value);
        }
    }
}

/// <p>Contains the response to a successful <a>GetSessionToken</a> request, including temporary AWS credentials that can be used to make AWS requests. </p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct GetSessionTokenResponse {
    /// <p><p>The temporary security credentials, which include an access key ID, a secret access key, and a security (or session) token.</p> <note> <p>The size of the security token that STS API operations return is not fixed. We strongly recommend that you make no assumptions about the maximum size.</p> </note></p>
    pub credentials: Option<Credentials>,
}

struct GetSessionTokenResponseDeserializer;
impl GetSessionTokenResponseDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(
        tag_name: &str,
        stack: &mut T,
    ) -> Result<GetSessionTokenResponse, XmlParseError> {
        deserialize_elements::<_, GetSessionTokenResponse, _>(
            tag_name,
            stack,
            |name, stack, obj| {
                match name {
                    "Credentials" => {
                        obj.credentials =
                            Some(CredentialsDeserializer::deserialize("Credentials", stack)?);
                    }
                    _ => skip_tree(stack),
                }
                Ok(())
            },
        )
    }
}
struct IssuerDeserializer;
impl IssuerDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct NameQualifierDeserializer;
impl NameQualifierDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct NonNegativeIntegerTypeDeserializer;
impl NonNegativeIntegerTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<i64, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = i64::from_str(characters(stack)?.as_ref()).unwrap();
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}

/// Serialize `PolicyDescriptorListType` contents to a `SignedRequest`.
struct PolicyDescriptorListTypeSerializer;
impl PolicyDescriptorListTypeSerializer {
    fn serialize(params: &mut Params, name: &str, obj: &Vec<PolicyDescriptorType>) {
        for (index, obj) in obj.iter().enumerate() {
            let key = format!("{}.member.{}", name, index + 1);
            PolicyDescriptorTypeSerializer::serialize(params, &key, obj);
        }
    }
}

/// <p>A reference to the IAM managed policy that is passed as a session policy for a role session or a federated user session.</p>
#[derive(Default, Debug, Clone, PartialEq)]
pub struct PolicyDescriptorType {
    /// <p>The Amazon Resource Name (ARN) of the IAM managed policy to use as a session policy for the role. For more information about ARNs, see <a href="general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and AWS Service Namespaces</a> in the <i>AWS General Reference</i>.</p>
    pub arn: Option<String>,
}

/// Serialize `PolicyDescriptorType` contents to a `SignedRequest`.
struct PolicyDescriptorTypeSerializer;
impl PolicyDescriptorTypeSerializer {
    fn serialize(params: &mut Params, name: &str, obj: &PolicyDescriptorType) {
        let mut prefix = name.to_string();
        if prefix != "" {
            prefix.push_str(".");
        }

        if let Some(ref field_value) = obj.arn {
            params.put(&format!("{}{}", prefix, "arn"), &field_value);
        }
    }
}

struct SubjectDeserializer;
impl SubjectDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct SubjectTypeDeserializer;
impl SubjectTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct TokenTypeDeserializer;
impl TokenTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct UserIdTypeDeserializer;
impl UserIdTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
struct WebIdentitySubjectTypeDeserializer;
impl WebIdentitySubjectTypeDeserializer {
    #[allow(unused_variables)]
    fn deserialize<T: Peek + Next>(tag_name: &str, stack: &mut T) -> Result<String, XmlParseError> {
        start_element(tag_name, stack)?;
        let obj = characters(stack)?;
        end_element(tag_name, stack)?;

        Ok(obj)
    }
}
/// Errors returned by AssumeRole
#[derive(Debug, PartialEq)]
pub enum AssumeRoleError {
    /// <p>The request was rejected because the policy document was malformed. The error message describes the specific error.</p>
    MalformedPolicyDocument(String),
    /// <p>The request was rejected because the policy document was too large. The error message describes how big the policy document is, in packed form, as a percentage of what the API allows.</p>
    PackedPolicyTooLarge(String),
    /// <p>STS is not activated in the requested region for the account that is being asked to generate credentials. The account administrator must use the IAM console to activate STS in that region. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html">Activating and Deactivating AWS STS in an AWS Region</a> in the <i>IAM User Guide</i>.</p>
    RegionDisabled(String),
}

impl AssumeRoleError {
    pub fn from_response(res: BufferedHttpResponse) -> RusotoError<AssumeRoleError> {
        {
            let reader = EventReader::new(res.body.as_ref());
            let mut stack = XmlResponse::new(reader.into_iter().peekable());
            find_start_element(&mut stack);
            if let Ok(parsed_error) = Self::deserialize(&mut stack) {
                match &parsed_error.code[..] {
                    "MalformedPolicyDocument" => {
                        return RusotoError::Service(AssumeRoleError::MalformedPolicyDocument(
                            parsed_error.message,
                        ))
                    }
                    "PackedPolicyTooLarge" => {
                        return RusotoError::Service(AssumeRoleError::PackedPolicyTooLarge(
                            parsed_error.message,
                        ))
                    }
                    "RegionDisabledException" => {
                        return RusotoError::Service(AssumeRoleError::RegionDisabled(
                            parsed_error.message,
                        ))
                    }
                    _ => {}
                }
            }
        }
        RusotoError::Unknown(res)
    }

    fn deserialize<T>(stack: &mut T) -> Result<XmlError, XmlParseError>
    where
        T: Peek + Next,
    {
        start_element("ErrorResponse", stack)?;
        XmlErrorDeserializer::deserialize("Error", stack)
    }
}
impl fmt::Display for AssumeRoleError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        write!(f, "{}", self.description())
    }
}
impl Error for AssumeRoleError {
    fn description(&self) -> &str {
        match *self {
            AssumeRoleError::MalformedPolicyDocument(ref cause) => cause,
            AssumeRoleError::PackedPolicyTooLarge(ref cause) => cause,
            AssumeRoleError::RegionDisabled(ref cause) => cause,
        }
    }
}
/// Errors returned by AssumeRoleWithSAML
#[derive(Debug, PartialEq)]
pub enum AssumeRoleWithSAMLError {
    /// <p>The web identity token that was passed is expired or is not valid. Get a new identity token from the identity provider and then retry the request.</p>
    ExpiredToken(String),
    /// <p>The identity provider (IdP) reported that authentication failed. This might be because the claim is invalid.</p> <p>If this error is returned for the <code>AssumeRoleWithWebIdentity</code> operation, it can also mean that the claim has expired or has been explicitly revoked. </p>
    IDPRejectedClaim(String),
    /// <p>The web identity token that was passed could not be validated by AWS. Get a new identity token from the identity provider and then retry the request.</p>
    InvalidIdentityToken(String),
    /// <p>The request was rejected because the policy document was malformed. The error message describes the specific error.</p>
    MalformedPolicyDocument(String),
    /// <p>The request was rejected because the policy document was too large. The error message describes how big the policy document is, in packed form, as a percentage of what the API allows.</p>
    PackedPolicyTooLarge(String),
    /// <p>STS is not activated in the requested region for the account that is being asked to generate credentials. The account administrator must use the IAM console to activate STS in that region. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html">Activating and Deactivating AWS STS in an AWS Region</a> in the <i>IAM User Guide</i>.</p>
    RegionDisabled(String),
}

impl AssumeRoleWithSAMLError {
    pub fn from_response(res: BufferedHttpResponse) -> RusotoError<AssumeRoleWithSAMLError> {
        {
            let reader = EventReader::new(res.body.as_ref());
            let mut stack = XmlResponse::new(reader.into_iter().peekable());
            find_start_element(&mut stack);
            if let Ok(parsed_error) = Self::deserialize(&mut stack) {
                match &parsed_error.code[..] {
                    "ExpiredTokenException" => {
                        return RusotoError::Service(AssumeRoleWithSAMLError::ExpiredToken(
                            parsed_error.message,
                        ))
                    }
                    "IDPRejectedClaim" => {
                        return RusotoError::Service(AssumeRoleWithSAMLError::IDPRejectedClaim(
                            parsed_error.message,
                        ))
                    }
                    "InvalidIdentityToken" => {
                        return RusotoError::Service(AssumeRoleWithSAMLError::InvalidIdentityToken(
                            parsed_error.message,
                        ))
                    }
                    "MalformedPolicyDocument" => {
                        return RusotoError::Service(
                            AssumeRoleWithSAMLError::MalformedPolicyDocument(parsed_error.message),
                        )
                    }
                    "PackedPolicyTooLarge" => {
                        return RusotoError::Service(AssumeRoleWithSAMLError::PackedPolicyTooLarge(
                            parsed_error.message,
                        ))
                    }
                    "RegionDisabledException" => {
                        return RusotoError::Service(AssumeRoleWithSAMLError::RegionDisabled(
                            parsed_error.message,
                        ))
                    }
                    _ => {}
                }
            }
        }
        RusotoError::Unknown(res)
    }

    fn deserialize<T>(stack: &mut T) -> Result<XmlError, XmlParseError>
    where
        T: Peek + Next,
    {
        start_element("ErrorResponse", stack)?;
        XmlErrorDeserializer::deserialize("Error", stack)
    }
}
impl fmt::Display for AssumeRoleWithSAMLError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        write!(f, "{}", self.description())
    }
}
impl Error for AssumeRoleWithSAMLError {
    fn description(&self) -> &str {
        match *self {
            AssumeRoleWithSAMLError::ExpiredToken(ref cause) => cause,
            AssumeRoleWithSAMLError::IDPRejectedClaim(ref cause) => cause,
            AssumeRoleWithSAMLError::InvalidIdentityToken(ref cause) => cause,
            AssumeRoleWithSAMLError::MalformedPolicyDocument(ref cause) => cause,
            AssumeRoleWithSAMLError::PackedPolicyTooLarge(ref cause) => cause,
            AssumeRoleWithSAMLError::RegionDisabled(ref cause) => cause,
        }
    }
}
/// Errors returned by AssumeRoleWithWebIdentity
#[derive(Debug, PartialEq)]
pub enum AssumeRoleWithWebIdentityError {
    /// <p>The web identity token that was passed is expired or is not valid. Get a new identity token from the identity provider and then retry the request.</p>
    ExpiredToken(String),
    /// <p>The request could not be fulfilled because the non-AWS identity provider (IDP) that was asked to verify the incoming identity token could not be reached. This is often a transient error caused by network conditions. Retry the request a limited number of times so that you don't exceed the request rate. If the error persists, the non-AWS identity provider might be down or not responding.</p>
    IDPCommunicationError(String),
    /// <p>The identity provider (IdP) reported that authentication failed. This might be because the claim is invalid.</p> <p>If this error is returned for the <code>AssumeRoleWithWebIdentity</code> operation, it can also mean that the claim has expired or has been explicitly revoked. </p>
    IDPRejectedClaim(String),
    /// <p>The web identity token that was passed could not be validated by AWS. Get a new identity token from the identity provider and then retry the request.</p>
    InvalidIdentityToken(String),
    /// <p>The request was rejected because the policy document was malformed. The error message describes the specific error.</p>
    MalformedPolicyDocument(String),
    /// <p>The request was rejected because the policy document was too large. The error message describes how big the policy document is, in packed form, as a percentage of what the API allows.</p>
    PackedPolicyTooLarge(String),
    /// <p>STS is not activated in the requested region for the account that is being asked to generate credentials. The account administrator must use the IAM console to activate STS in that region. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html">Activating and Deactivating AWS STS in an AWS Region</a> in the <i>IAM User Guide</i>.</p>
    RegionDisabled(String),
}

impl AssumeRoleWithWebIdentityError {
    pub fn from_response(res: BufferedHttpResponse) -> RusotoError<AssumeRoleWithWebIdentityError> {
        {
            let reader = EventReader::new(res.body.as_ref());
            let mut stack = XmlResponse::new(reader.into_iter().peekable());
            find_start_element(&mut stack);
            if let Ok(parsed_error) = Self::deserialize(&mut stack) {
                match &parsed_error.code[..] {
                    "ExpiredTokenException" => {
                        return RusotoError::Service(AssumeRoleWithWebIdentityError::ExpiredToken(
                            parsed_error.message,
                        ))
                    }
                    "IDPCommunicationError" => {
                        return RusotoError::Service(
                            AssumeRoleWithWebIdentityError::IDPCommunicationError(
                                parsed_error.message,
                            ),
                        )
                    }
                    "IDPRejectedClaim" => {
                        return RusotoError::Service(
                            AssumeRoleWithWebIdentityError::IDPRejectedClaim(parsed_error.message),
                        )
                    }
                    "InvalidIdentityToken" => {
                        return RusotoError::Service(
                            AssumeRoleWithWebIdentityError::InvalidIdentityToken(
                                parsed_error.message,
                            ),
                        )
                    }
                    "MalformedPolicyDocument" => {
                        return RusotoError::Service(
                            AssumeRoleWithWebIdentityError::MalformedPolicyDocument(
                                parsed_error.message,
                            ),
                        )
                    }
                    "PackedPolicyTooLarge" => {
                        return RusotoError::Service(
                            AssumeRoleWithWebIdentityError::PackedPolicyTooLarge(
                                parsed_error.message,
                            ),
                        )
                    }
                    "RegionDisabledException" => {
                        return RusotoError::Service(
                            AssumeRoleWithWebIdentityError::RegionDisabled(parsed_error.message),
                        )
                    }
                    _ => {}
                }
            }
        }
        RusotoError::Unknown(res)
    }

    fn deserialize<T>(stack: &mut T) -> Result<XmlError, XmlParseError>
    where
        T: Peek + Next,
    {
        start_element("ErrorResponse", stack)?;
        XmlErrorDeserializer::deserialize("Error", stack)
    }
}
impl fmt::Display for AssumeRoleWithWebIdentityError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        write!(f, "{}", self.description())
    }
}
impl Error for AssumeRoleWithWebIdentityError {
    fn description(&self) -> &str {
        match *self {
            AssumeRoleWithWebIdentityError::ExpiredToken(ref cause) => cause,
            AssumeRoleWithWebIdentityError::IDPCommunicationError(ref cause) => cause,
            AssumeRoleWithWebIdentityError::IDPRejectedClaim(ref cause) => cause,
            AssumeRoleWithWebIdentityError::InvalidIdentityToken(ref cause) => cause,
            AssumeRoleWithWebIdentityError::MalformedPolicyDocument(ref cause) => cause,
            AssumeRoleWithWebIdentityError::PackedPolicyTooLarge(ref cause) => cause,
            AssumeRoleWithWebIdentityError::RegionDisabled(ref cause) => cause,
        }
    }
}
/// Errors returned by DecodeAuthorizationMessage
#[derive(Debug, PartialEq)]
pub enum DecodeAuthorizationMessageError {
    /// <p>The error returned if the message passed to <code>DecodeAuthorizationMessage</code> was invalid. This can happen if the token contains invalid characters, such as linebreaks. </p>
    InvalidAuthorizationMessage(String),
}

impl DecodeAuthorizationMessageError {
    pub fn from_response(
        res: BufferedHttpResponse,
    ) -> RusotoError<DecodeAuthorizationMessageError> {
        {
            let reader = EventReader::new(res.body.as_ref());
            let mut stack = XmlResponse::new(reader.into_iter().peekable());
            find_start_element(&mut stack);
            if let Ok(parsed_error) = Self::deserialize(&mut stack) {
                match &parsed_error.code[..] {
                    "InvalidAuthorizationMessageException" => {
                        return RusotoError::Service(
                            DecodeAuthorizationMessageError::InvalidAuthorizationMessage(
                                parsed_error.message,
                            ),
                        )
                    }
                    _ => {}
                }
            }
        }
        RusotoError::Unknown(res)
    }

    fn deserialize<T>(stack: &mut T) -> Result<XmlError, XmlParseError>
    where
        T: Peek + Next,
    {
        start_element("ErrorResponse", stack)?;
        XmlErrorDeserializer::deserialize("Error", stack)
    }
}
impl fmt::Display for DecodeAuthorizationMessageError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        write!(f, "{}", self.description())
    }
}
impl Error for DecodeAuthorizationMessageError {
    fn description(&self) -> &str {
        match *self {
            DecodeAuthorizationMessageError::InvalidAuthorizationMessage(ref cause) => cause,
        }
    }
}
/// Errors returned by GetCallerIdentity
#[derive(Debug, PartialEq)]
pub enum GetCallerIdentityError {}

impl GetCallerIdentityError {
    pub fn from_response(res: BufferedHttpResponse) -> RusotoError<GetCallerIdentityError> {
        {
            let reader = EventReader::new(res.body.as_ref());
            let mut stack = XmlResponse::new(reader.into_iter().peekable());
            find_start_element(&mut stack);
            if let Ok(parsed_error) = Self::deserialize(&mut stack) {
                match &parsed_error.code[..] {
                    _ => {}
                }
            }
        }
        RusotoError::Unknown(res)
    }

    fn deserialize<T>(stack: &mut T) -> Result<XmlError, XmlParseError>
    where
        T: Peek + Next,
    {
        start_element("ErrorResponse", stack)?;
        XmlErrorDeserializer::deserialize("Error", stack)
    }
}
impl fmt::Display for GetCallerIdentityError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        write!(f, "{}", self.description())
    }
}
impl Error for GetCallerIdentityError {
    fn description(&self) -> &str {
        match *self {}
    }
}
/// Errors returned by GetFederationToken
#[derive(Debug, PartialEq)]
pub enum GetFederationTokenError {
    /// <p>The request was rejected because the policy document was malformed. The error message describes the specific error.</p>
    MalformedPolicyDocument(String),
    /// <p>The request was rejected because the policy document was too large. The error message describes how big the policy document is, in packed form, as a percentage of what the API allows.</p>
    PackedPolicyTooLarge(String),
    /// <p>STS is not activated in the requested region for the account that is being asked to generate credentials. The account administrator must use the IAM console to activate STS in that region. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html">Activating and Deactivating AWS STS in an AWS Region</a> in the <i>IAM User Guide</i>.</p>
    RegionDisabled(String),
}

impl GetFederationTokenError {
    pub fn from_response(res: BufferedHttpResponse) -> RusotoError<GetFederationTokenError> {
        {
            let reader = EventReader::new(res.body.as_ref());
            let mut stack = XmlResponse::new(reader.into_iter().peekable());
            find_start_element(&mut stack);
            if let Ok(parsed_error) = Self::deserialize(&mut stack) {
                match &parsed_error.code[..] {
                    "MalformedPolicyDocument" => {
                        return RusotoError::Service(
                            GetFederationTokenError::MalformedPolicyDocument(parsed_error.message),
                        )
                    }
                    "PackedPolicyTooLarge" => {
                        return RusotoError::Service(GetFederationTokenError::PackedPolicyTooLarge(
                            parsed_error.message,
                        ))
                    }
                    "RegionDisabledException" => {
                        return RusotoError::Service(GetFederationTokenError::RegionDisabled(
                            parsed_error.message,
                        ))
                    }
                    _ => {}
                }
            }
        }
        RusotoError::Unknown(res)
    }

    fn deserialize<T>(stack: &mut T) -> Result<XmlError, XmlParseError>
    where
        T: Peek + Next,
    {
        start_element("ErrorResponse", stack)?;
        XmlErrorDeserializer::deserialize("Error", stack)
    }
}
impl fmt::Display for GetFederationTokenError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        write!(f, "{}", self.description())
    }
}
impl Error for GetFederationTokenError {
    fn description(&self) -> &str {
        match *self {
            GetFederationTokenError::MalformedPolicyDocument(ref cause) => cause,
            GetFederationTokenError::PackedPolicyTooLarge(ref cause) => cause,
            GetFederationTokenError::RegionDisabled(ref cause) => cause,
        }
    }
}
/// Errors returned by GetSessionToken
#[derive(Debug, PartialEq)]
pub enum GetSessionTokenError {
    /// <p>STS is not activated in the requested region for the account that is being asked to generate credentials. The account administrator must use the IAM console to activate STS in that region. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_enable-regions.html">Activating and Deactivating AWS STS in an AWS Region</a> in the <i>IAM User Guide</i>.</p>
    RegionDisabled(String),
}

impl GetSessionTokenError {
    pub fn from_response(res: BufferedHttpResponse) -> RusotoError<GetSessionTokenError> {
        {
            let reader = EventReader::new(res.body.as_ref());
            let mut stack = XmlResponse::new(reader.into_iter().peekable());
            find_start_element(&mut stack);
            if let Ok(parsed_error) = Self::deserialize(&mut stack) {
                match &parsed_error.code[..] {
                    "RegionDisabledException" => {
                        return RusotoError::Service(GetSessionTokenError::RegionDisabled(
                            parsed_error.message,
                        ))
                    }
                    _ => {}
                }
            }
        }
        RusotoError::Unknown(res)
    }

    fn deserialize<T>(stack: &mut T) -> Result<XmlError, XmlParseError>
    where
        T: Peek + Next,
    {
        start_element("ErrorResponse", stack)?;
        XmlErrorDeserializer::deserialize("Error", stack)
    }
}
impl fmt::Display for GetSessionTokenError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        write!(f, "{}", self.description())
    }
}
impl Error for GetSessionTokenError {
    fn description(&self) -> &str {
        match *self {
            GetSessionTokenError::RegionDisabled(ref cause) => cause,
        }
    }
}
/// Trait representing the capabilities of the AWS STS API. AWS STS clients implement this trait.
pub trait Sts {
    /// <p>Returns a set of temporary security credentials that you can use to access AWS resources that you might not normally have access to. These temporary credentials consist of an access key ID, a secret access key, and a security token. Typically, you use <code>AssumeRole</code> within your account or for cross-account access. For a comparison of <code>AssumeRole</code> with other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <important> <p>You cannot use AWS account root user credentials to call <code>AssumeRole</code>. You must use credentials for an IAM user or an IAM role to call <code>AssumeRole</code>.</p> </important> <p>For cross-account access, imagine that you own multiple accounts and need to access resources in each account. You could create long-term credentials in each account to access those resources. However, managing all those credentials and remembering which one can access which account can be time consuming. Instead, you can create one set of long-term credentials in one account. Then use temporary security credentials to access all the other accounts by assuming roles in those accounts. For more information about roles, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles.html">IAM Roles</a> in the <i>IAM User Guide</i>. </p> <p>By default, the temporary security credentials created by <code>AssumeRole</code> last for one hour. However, you can use the optional <code>DurationSeconds</code> parameter to specify the duration of your session. You can provide a value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your role, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session">View the Maximum Session Duration Setting for a Role</a> in the <i>IAM User Guide</i>. The maximum session duration limit applies when you use the <code>AssumeRole*</code> API operations or the <code>assume-role*</code> CLI commands. However the limit does not apply when you use those operations to create a console URL. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html">Using IAM Roles</a> in the <i>IAM User Guide</i>.</p> <p>The temporary security credentials created by <code>AssumeRole</code> can be used to make API calls to any AWS service with the following exception: You cannot call the AWS STS <code>GetFederationToken</code> or <code>GetSessionToken</code> API operations.</p> <p>(Optional) You can pass inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policies</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plain text that you use for both inline and managed session policies shouldn't exceed 2048 characters. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <p>To assume a role from a different account, your AWS account must be trusted by the role. The trust relationship is defined in the role's trust policy when the role is created. That trust policy states which accounts are allowed to delegate that access to users in the account. </p> <p>A user who wants to access a role in a different account must also have permissions that are delegated from the user account administrator. The administrator must attach a policy that allows the user to call <code>AssumeRole</code> for the ARN of the role in the other account. If the user is in the same account as the role, then you can do either of the following:</p> <ul> <li> <p>Attach a policy to the user (identical to the previous user in a different account).</p> </li> <li> <p>Add the user as a principal directly in the role's trust policy.</p> </li> </ul> <p>In this case, the trust policy acts as an IAM resource-based policy. Users in the same account as the role do not need explicit permission to assume the role. For more information about trust policies and resource-based policies, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html">IAM Policies</a> in the <i>IAM User Guide</i>.</p> <p> <b>Using MFA with AssumeRole</b> </p> <p>(Optional) You can include multi-factor authentication (MFA) information when you call <code>AssumeRole</code>. This is useful for cross-account scenarios to ensure that the user that assumes the role has been authenticated with an AWS MFA device. In that scenario, the trust policy of the role being assumed includes a condition that tests for MFA authentication. If the caller does not include valid MFA information, the request to assume the role is denied. The condition in a trust policy that tests for MFA authentication might look like the following example.</p> <p> <code>"Condition": {"Bool": {"aws:MultiFactorAuthPresent": true}}</code> </p> <p>For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/MFAProtectedAPI.html">Configuring MFA-Protected API Access</a> in the <i>IAM User Guide</i> guide.</p> <p>To use MFA with <code>AssumeRole</code>, you pass values for the <code>SerialNumber</code> and <code>TokenCode</code> parameters. The <code>SerialNumber</code> value identifies the user's hardware or virtual MFA device. The <code>TokenCode</code> is the time-based one-time password (TOTP) that the MFA device produces. </p>
    fn assume_role(
        &self,
        input: AssumeRoleRequest,
    ) -> RusotoFuture<AssumeRoleResponse, AssumeRoleError>;

    /// <p><p>Returns a set of temporary security credentials for users who have been authenticated via a SAML authentication response. This operation provides a mechanism for tying an enterprise identity store or directory to role-based AWS access without user-specific credentials or configuration. For a comparison of <code>AssumeRoleWithSAML</code> with the other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <p>The temporary security credentials returned by this operation consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to AWS services.</p> <p>By default, the temporary security credentials created by <code>AssumeRoleWithSAML</code> last for one hour. However, you can use the optional <code>DurationSeconds</code> parameter to specify the duration of your session. Your role session lasts for the duration that you specify, or until the time specified in the SAML authentication response&#39;s <code>SessionNotOnOrAfter</code> value, whichever is shorter. You can provide a <code>DurationSeconds</code> value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your role, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session">View the Maximum Session Duration Setting for a Role</a> in the <i>IAM User Guide</i>. The maximum session duration limit applies when you use the <code>AssumeRole<em></code> API operations or the <code>assume-role</em></code> CLI commands. However the limit does not apply when you use those operations to create a console URL. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html">Using IAM Roles</a> in the <i>IAM User Guide</i>.</p> <p>The temporary security credentials created by <code>AssumeRoleWithSAML</code> can be used to make API calls to any AWS service with the following exception: you cannot call the STS <code>GetFederationToken</code> or <code>GetSessionToken</code> API operations.</p> <p>(Optional) You can pass inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policies</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plain text that you use for both inline and managed session policies shouldn&#39;t exceed 2048 characters. Passing policies to this operation returns new temporary credentials. The resulting session&#39;s permissions are the intersection of the role&#39;s identity-based policy and the session policies. You can use the role&#39;s temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <p>Before your application can call <code>AssumeRoleWithSAML</code>, you must configure your SAML identity provider (IdP) to issue the claims required by AWS. Additionally, you must use AWS Identity and Access Management (IAM) to create a SAML provider entity in your AWS account that represents your identity provider. You must also create an IAM role that specifies this SAML provider in its trust policy. </p> <p>Calling <code>AssumeRoleWithSAML</code> does not require the use of AWS security credentials. The identity of the caller is validated by using keys in the metadata document that is uploaded for the SAML provider entity for your identity provider. </p> <important> <p>Calling <code>AssumeRoleWithSAML</code> can result in an entry in your AWS CloudTrail logs. The entry includes the value in the <code>NameID</code> element of the SAML assertion. We recommend that you use a <code>NameIDType</code> that is not associated with any personally identifiable information (PII). For example, you could instead use the Persistent Identifier (<code>urn:oasis:names:tc:SAML:2.0:nameid-format:persistent</code>).</p> </important> <p>For more information, see the following resources:</p> <ul> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_saml.html">About SAML 2.0-based Federation</a> in the <i>IAM User Guide</i>. </p> </li> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml.html">Creating SAML Identity Providers</a> in the <i>IAM User Guide</i>. </p> </li> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml_relying-party.html">Configuring a Relying Party and Claims</a> in the <i>IAM User Guide</i>. </p> </li> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-idp_saml.html">Creating a Role for SAML 2.0 Federation</a> in the <i>IAM User Guide</i>. </p> </li> </ul></p>
    fn assume_role_with_saml(
        &self,
        input: AssumeRoleWithSAMLRequest,
    ) -> RusotoFuture<AssumeRoleWithSAMLResponse, AssumeRoleWithSAMLError>;

    /// <p><p>Returns a set of temporary security credentials for users who have been authenticated in a mobile or web application with a web identity provider. Example providers include Amazon Cognito, Login with Amazon, Facebook, Google, or any OpenID Connect-compatible identity provider.</p> <note> <p>For mobile applications, we recommend that you use Amazon Cognito. You can use Amazon Cognito with the <a href="http://aws.amazon.com/sdkforios/">AWS SDK for iOS Developer Guide</a> and the <a href="http://aws.amazon.com/sdkforandroid/">AWS SDK for Android Developer Guide</a> to uniquely identify a user. You can also supply the user with a consistent identity throughout the lifetime of an application.</p> <p>To learn more about Amazon Cognito, see <a href="https://docs.aws.amazon.com/mobile/sdkforandroid/developerguide/cognito-auth.html#d0e840">Amazon Cognito Overview</a> in <i>AWS SDK for Android Developer Guide</i> and <a href="https://docs.aws.amazon.com/mobile/sdkforios/developerguide/cognito-auth.html#d0e664">Amazon Cognito Overview</a> in the <i>AWS SDK for iOS Developer Guide</i>.</p> </note> <p>Calling <code>AssumeRoleWithWebIdentity</code> does not require the use of AWS security credentials. Therefore, you can distribute an application (for example, on mobile devices) that requests temporary security credentials without including long-term AWS credentials in the application. You also don&#39;t need to deploy server-based proxy services that use long-term AWS credentials. Instead, the identity of the caller is validated by using a token from the web identity provider. For a comparison of <code>AssumeRoleWithWebIdentity</code> with the other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <p>The temporary security credentials returned by this API consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to AWS service API operations.</p> <p>By default, the temporary security credentials created by <code>AssumeRoleWithWebIdentity</code> last for one hour. However, you can use the optional <code>DurationSeconds</code> parameter to specify the duration of your session. You can provide a value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your role, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session">View the Maximum Session Duration Setting for a Role</a> in the <i>IAM User Guide</i>. The maximum session duration limit applies when you use the <code>AssumeRole<em></code> API operations or the <code>assume-role</em></code> CLI commands. However the limit does not apply when you use those operations to create a console URL. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html">Using IAM Roles</a> in the <i>IAM User Guide</i>. </p> <p>The temporary security credentials created by <code>AssumeRoleWithWebIdentity</code> can be used to make API calls to any AWS service with the following exception: you cannot call the STS <code>GetFederationToken</code> or <code>GetSessionToken</code> API operations.</p> <p>(Optional) You can pass inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policies</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plain text that you use for both inline and managed session policies shouldn&#39;t exceed 2048 characters. Passing policies to this operation returns new temporary credentials. The resulting session&#39;s permissions are the intersection of the role&#39;s identity-based policy and the session policies. You can use the role&#39;s temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <p>Before your application can call <code>AssumeRoleWithWebIdentity</code>, you must have an identity token from a supported identity provider and create a role that the application can assume. The role that your application assumes must trust the identity provider that is associated with the identity token. In other words, the identity provider must be specified in the role&#39;s trust policy. </p> <important> <p>Calling <code>AssumeRoleWithWebIdentity</code> can result in an entry in your AWS CloudTrail logs. The entry includes the <a href="http://openid.net/specs/openid-connect-core-1_0.html#Claims">Subject</a> of the provided Web Identity Token. We recommend that you avoid using any personally identifiable information (PII) in this field. For example, you could instead use a GUID or a pairwise identifier, as <a href="http://openid.net/specs/openid-connect-core-1_0.html#SubjectIDTypes">suggested in the OIDC specification</a>.</p> </important> <p>For more information about how to use web identity federation and the <code>AssumeRoleWithWebIdentity</code> API, see the following resources: </p> <ul> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_oidc_manual.html">Using Web Identity Federation API Operations for Mobile Apps</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity">Federation Through a Web-based Identity Provider</a>. </p> </li> <li> <p> <a href="https://web-identity-federation-playground.s3.amazonaws.com/index.html"> Web Identity Federation Playground</a>. Walk through the process of authenticating through Login with Amazon, Facebook, or Google, getting temporary security credentials, and then using those credentials to make a request to AWS. </p> </li> <li> <p> <a href="http://aws.amazon.com/sdkforios/">AWS SDK for iOS Developer Guide</a> and <a href="http://aws.amazon.com/sdkforandroid/">AWS SDK for Android Developer Guide</a>. These toolkits contain sample apps that show how to invoke the identity providers, and then how to use the information from these providers to get and use temporary security credentials. </p> </li> <li> <p> <a href="http://aws.amazon.com/articles/web-identity-federation-with-mobile-applications">Web Identity Federation with Mobile Applications</a>. This article discusses web identity federation and shows an example of how to use web identity federation to get access to content in Amazon S3. </p> </li> </ul></p>
    fn assume_role_with_web_identity(
        &self,
        input: AssumeRoleWithWebIdentityRequest,
    ) -> RusotoFuture<AssumeRoleWithWebIdentityResponse, AssumeRoleWithWebIdentityError>;

    /// <p><p>Decodes additional information about the authorization status of a request from an encoded message returned in response to an AWS request.</p> <p>For example, if a user is not authorized to perform an operation that he or she has requested, the request returns a <code>Client.UnauthorizedOperation</code> response (an HTTP 403 response). Some AWS operations additionally return an encoded message that can provide details about this authorization failure. </p> <note> <p>Only certain AWS operations return an encoded authorization message. The documentation for an individual operation indicates whether that operation returns an encoded message in addition to returning an HTTP code.</p> </note> <p>The message is encoded because the details of the authorization status can constitute privileged information that the user who requested the operation should not see. To decode an authorization status message, a user must be granted permissions via an IAM policy to request the <code>DecodeAuthorizationMessage</code> (<code>sts:DecodeAuthorizationMessage</code>) action. </p> <p>The decoded message includes the following type of information:</p> <ul> <li> <p>Whether the request was denied due to an explicit deny or due to the absence of an explicit allow. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_evaluation-logic.html#policy-eval-denyallow">Determining Whether a Request is Allowed or Denied</a> in the <i>IAM User Guide</i>. </p> </li> <li> <p>The principal who made the request.</p> </li> <li> <p>The requested action.</p> </li> <li> <p>The requested resource.</p> </li> <li> <p>The values of condition keys in the context of the user&#39;s request.</p> </li> </ul></p>
    fn decode_authorization_message(
        &self,
        input: DecodeAuthorizationMessageRequest,
    ) -> RusotoFuture<DecodeAuthorizationMessageResponse, DecodeAuthorizationMessageError>;

    /// <p>Returns details about the IAM identity whose credentials are used to call the API.</p>
    fn get_caller_identity(
        &self,
        input: GetCallerIdentityRequest,
    ) -> RusotoFuture<GetCallerIdentityResponse, GetCallerIdentityError>;

    /// <p>Returns a set of temporary security credentials (consisting of an access key ID, a secret access key, and a security token) for a federated user. A typical use is in a proxy application that gets temporary security credentials on behalf of distributed applications inside a corporate network. You must call the <code>GetFederationToken</code> operation using the long-term security credentials of an IAM user. As a result, this call is appropriate in contexts where those credentials can be safely stored, usually in a server-based application. For a comparison of <code>GetFederationToken</code> with the other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <note> <p>You can create a mobile-based or browser-based app that can authenticate users using a web identity provider like Login with Amazon, Facebook, Google, or an OpenID Connect-compatible identity provider. In this case, we recommend that you use <a href="http://aws.amazon.com/cognito/">Amazon Cognito</a> or <code>AssumeRoleWithWebIdentity</code>. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity">Federation Through a Web-based Identity Provider</a>.</p> </note> <p>You can also call <code>GetFederationToken</code> using the security credentials of an AWS account root user, but we do not recommend it. Instead, we recommend that you create an IAM user for the purpose of the proxy application. Then attach a policy to the IAM user that limits federated users to only the actions and resources that they need to access. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html">IAM Best Practices</a> in the <i>IAM User Guide</i>. </p> <p>The temporary credentials are valid for the specified duration, from 900 seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours). The default is 43,200 seconds (12 hours). Temporary credentials that are obtained by using AWS account root user credentials have a maximum duration of 3,600 seconds (1 hour).</p> <p>The temporary security credentials created by <code>GetFederationToken</code> can be used to make API calls to any AWS service with the following exceptions:</p> <ul> <li> <p>You cannot use these credentials to call any IAM API operations.</p> </li> <li> <p>You cannot call any STS API operations except <code>GetCallerIdentity</code>.</p> </li> </ul> <p> <b>Permissions</b> </p> <p>You must pass an inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policy</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plain text that you use for both inline and managed session policies shouldn't exceed 2048 characters.</p> <p>Though the session policy parameters are optional, if you do not pass a policy, then the resulting federated user session has no permissions. The only exception is when the credentials are used to access a resource that has a resource-based policy that specifically references the federated user session in the <code>Principal</code> element of the policy. When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>. For information about using <code>GetFederationToken</code> to create temporary security credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getfederationtoken">GetFederationToken—Federation Through a Custom Identity Broker</a>. </p>
    fn get_federation_token(
        &self,
        input: GetFederationTokenRequest,
    ) -> RusotoFuture<GetFederationTokenResponse, GetFederationTokenError>;

    /// <p>Returns a set of temporary credentials for an AWS account or IAM user. The credentials consist of an access key ID, a secret access key, and a security token. Typically, you use <code>GetSessionToken</code> if you want to use MFA to protect programmatic calls to specific AWS API operations like Amazon EC2 <code>StopInstances</code>. MFA-enabled IAM users would need to call <code>GetSessionToken</code> and submit an MFA code that is associated with their MFA device. Using the temporary security credentials that are returned from the call, IAM users can then make programmatic calls to API operations that require MFA authentication. If you do not supply a correct MFA code, then the API returns an access denied error. For a comparison of <code>GetSessionToken</code> with the other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <p>The <code>GetSessionToken</code> operation must be called by using the long-term AWS security credentials of the AWS account root user or an IAM user. Credentials that are created by IAM users are valid for the duration that you specify. This duration can range from 900 seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours), with a default of 43,200 seconds (12 hours). Credentials based on account credentials can range from 900 seconds (15 minutes) up to 3,600 seconds (1 hour), with a default of 1 hour. </p> <p>The temporary security credentials created by <code>GetSessionToken</code> can be used to make API calls to any AWS service with the following exceptions:</p> <ul> <li> <p>You cannot call any IAM API operations unless MFA authentication information is included in the request.</p> </li> <li> <p>You cannot call any STS API <i>except</i> <code>AssumeRole</code> or <code>GetCallerIdentity</code>.</p> </li> </ul> <note> <p>We recommend that you do not call <code>GetSessionToken</code> with AWS account root user credentials. Instead, follow our <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html#create-iam-users">best practices</a> by creating one or more IAM users, giving them the necessary permissions, and using IAM users for everyday interaction with AWS. </p> </note> <p>The credentials that are returned by <code>GetSessionToken</code> are based on permissions associated with the user whose credentials were used to call the operation. If <code>GetSessionToken</code> is called using AWS account root user credentials, the temporary credentials have root user permissions. Similarly, if <code>GetSessionToken</code> is called using the credentials of an IAM user, the temporary credentials have the same permissions as the IAM user. </p> <p>For more information about using <code>GetSessionToken</code> to create temporary credentials, go to <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getsessiontoken">Temporary Credentials for Users in Untrusted Environments</a> in the <i>IAM User Guide</i>. </p>
    fn get_session_token(
        &self,
        input: GetSessionTokenRequest,
    ) -> RusotoFuture<GetSessionTokenResponse, GetSessionTokenError>;
}
/// A client for the AWS STS API.
#[derive(Clone)]
pub struct StsClient {
    client: Client,
    region: region::Region,
}

impl StsClient {
    /// Creates a client backed by the default tokio event loop.
    ///
    /// The client will use the default credentials provider and tls client.
    pub fn new(region: region::Region) -> StsClient {
        StsClient {
            client: Client::shared(),
            region,
        }
    }

    pub fn new_with<P, D>(
        request_dispatcher: D,
        credentials_provider: P,
        region: region::Region,
    ) -> StsClient
    where
        P: ProvideAwsCredentials + Send + Sync + 'static,
        P::Future: Send,
        D: DispatchSignedRequest + Send + Sync + 'static,
        D::Future: Send,
    {
        StsClient {
            client: Client::new_with(credentials_provider, request_dispatcher),
            region,
        }
    }
}

impl Sts for StsClient {
    /// <p>Returns a set of temporary security credentials that you can use to access AWS resources that you might not normally have access to. These temporary credentials consist of an access key ID, a secret access key, and a security token. Typically, you use <code>AssumeRole</code> within your account or for cross-account access. For a comparison of <code>AssumeRole</code> with other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <important> <p>You cannot use AWS account root user credentials to call <code>AssumeRole</code>. You must use credentials for an IAM user or an IAM role to call <code>AssumeRole</code>.</p> </important> <p>For cross-account access, imagine that you own multiple accounts and need to access resources in each account. You could create long-term credentials in each account to access those resources. However, managing all those credentials and remembering which one can access which account can be time consuming. Instead, you can create one set of long-term credentials in one account. Then use temporary security credentials to access all the other accounts by assuming roles in those accounts. For more information about roles, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles.html">IAM Roles</a> in the <i>IAM User Guide</i>. </p> <p>By default, the temporary security credentials created by <code>AssumeRole</code> last for one hour. However, you can use the optional <code>DurationSeconds</code> parameter to specify the duration of your session. You can provide a value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your role, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session">View the Maximum Session Duration Setting for a Role</a> in the <i>IAM User Guide</i>. The maximum session duration limit applies when you use the <code>AssumeRole*</code> API operations or the <code>assume-role*</code> CLI commands. However the limit does not apply when you use those operations to create a console URL. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html">Using IAM Roles</a> in the <i>IAM User Guide</i>.</p> <p>The temporary security credentials created by <code>AssumeRole</code> can be used to make API calls to any AWS service with the following exception: You cannot call the AWS STS <code>GetFederationToken</code> or <code>GetSessionToken</code> API operations.</p> <p>(Optional) You can pass inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policies</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plain text that you use for both inline and managed session policies shouldn't exceed 2048 characters. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <p>To assume a role from a different account, your AWS account must be trusted by the role. The trust relationship is defined in the role's trust policy when the role is created. That trust policy states which accounts are allowed to delegate that access to users in the account. </p> <p>A user who wants to access a role in a different account must also have permissions that are delegated from the user account administrator. The administrator must attach a policy that allows the user to call <code>AssumeRole</code> for the ARN of the role in the other account. If the user is in the same account as the role, then you can do either of the following:</p> <ul> <li> <p>Attach a policy to the user (identical to the previous user in a different account).</p> </li> <li> <p>Add the user as a principal directly in the role's trust policy.</p> </li> </ul> <p>In this case, the trust policy acts as an IAM resource-based policy. Users in the same account as the role do not need explicit permission to assume the role. For more information about trust policies and resource-based policies, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html">IAM Policies</a> in the <i>IAM User Guide</i>.</p> <p> <b>Using MFA with AssumeRole</b> </p> <p>(Optional) You can include multi-factor authentication (MFA) information when you call <code>AssumeRole</code>. This is useful for cross-account scenarios to ensure that the user that assumes the role has been authenticated with an AWS MFA device. In that scenario, the trust policy of the role being assumed includes a condition that tests for MFA authentication. If the caller does not include valid MFA information, the request to assume the role is denied. The condition in a trust policy that tests for MFA authentication might look like the following example.</p> <p> <code>"Condition": {"Bool": {"aws:MultiFactorAuthPresent": true}}</code> </p> <p>For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/MFAProtectedAPI.html">Configuring MFA-Protected API Access</a> in the <i>IAM User Guide</i> guide.</p> <p>To use MFA with <code>AssumeRole</code>, you pass values for the <code>SerialNumber</code> and <code>TokenCode</code> parameters. The <code>SerialNumber</code> value identifies the user's hardware or virtual MFA device. The <code>TokenCode</code> is the time-based one-time password (TOTP) that the MFA device produces. </p>
    fn assume_role(
        &self,
        input: AssumeRoleRequest,
    ) -> RusotoFuture<AssumeRoleResponse, AssumeRoleError> {
        let mut request = SignedRequest::new("POST", "sts", &self.region, "/");
        let mut params = Params::new();

        params.put("Action", "AssumeRole");
        params.put("Version", "2011-06-15");
        AssumeRoleRequestSerializer::serialize(&mut params, "", &input);
        request.set_payload(Some(serde_urlencoded::to_string(&params).unwrap()));
        request.set_content_type("application/x-www-form-urlencoded".to_owned());

        self.client.sign_and_dispatch(request, |response| {
            if !response.status.is_success() {
                return Box::new(
                    response
                        .buffer()
                        .from_err()
                        .and_then(|response| Err(AssumeRoleError::from_response(response))),
                );
            }

            Box::new(response.buffer().from_err().and_then(move |response| {
                let result;

                if response.body.is_empty() {
                    result = AssumeRoleResponse::default();
                } else {
                    let reader = EventReader::new_with_config(
                        response.body.as_ref(),
                        ParserConfig::new().trim_whitespace(true),
                    );
                    let mut stack = XmlResponse::new(reader.into_iter().peekable());
                    let _start_document = stack.next();
                    let actual_tag_name = peek_at_name(&mut stack)?;
                    start_element(&actual_tag_name, &mut stack)?;
                    result = AssumeRoleResponseDeserializer::deserialize(
                        "AssumeRoleResult",
                        &mut stack,
                    )?;
                    skip_tree(&mut stack);
                    end_element(&actual_tag_name, &mut stack)?;
                }
                // parse non-payload
                Ok(result)
            }))
        })
    }

    /// <p><p>Returns a set of temporary security credentials for users who have been authenticated via a SAML authentication response. This operation provides a mechanism for tying an enterprise identity store or directory to role-based AWS access without user-specific credentials or configuration. For a comparison of <code>AssumeRoleWithSAML</code> with the other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <p>The temporary security credentials returned by this operation consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to AWS services.</p> <p>By default, the temporary security credentials created by <code>AssumeRoleWithSAML</code> last for one hour. However, you can use the optional <code>DurationSeconds</code> parameter to specify the duration of your session. Your role session lasts for the duration that you specify, or until the time specified in the SAML authentication response&#39;s <code>SessionNotOnOrAfter</code> value, whichever is shorter. You can provide a <code>DurationSeconds</code> value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your role, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session">View the Maximum Session Duration Setting for a Role</a> in the <i>IAM User Guide</i>. The maximum session duration limit applies when you use the <code>AssumeRole<em></code> API operations or the <code>assume-role</em></code> CLI commands. However the limit does not apply when you use those operations to create a console URL. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html">Using IAM Roles</a> in the <i>IAM User Guide</i>.</p> <p>The temporary security credentials created by <code>AssumeRoleWithSAML</code> can be used to make API calls to any AWS service with the following exception: you cannot call the STS <code>GetFederationToken</code> or <code>GetSessionToken</code> API operations.</p> <p>(Optional) You can pass inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policies</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plain text that you use for both inline and managed session policies shouldn&#39;t exceed 2048 characters. Passing policies to this operation returns new temporary credentials. The resulting session&#39;s permissions are the intersection of the role&#39;s identity-based policy and the session policies. You can use the role&#39;s temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <p>Before your application can call <code>AssumeRoleWithSAML</code>, you must configure your SAML identity provider (IdP) to issue the claims required by AWS. Additionally, you must use AWS Identity and Access Management (IAM) to create a SAML provider entity in your AWS account that represents your identity provider. You must also create an IAM role that specifies this SAML provider in its trust policy. </p> <p>Calling <code>AssumeRoleWithSAML</code> does not require the use of AWS security credentials. The identity of the caller is validated by using keys in the metadata document that is uploaded for the SAML provider entity for your identity provider. </p> <important> <p>Calling <code>AssumeRoleWithSAML</code> can result in an entry in your AWS CloudTrail logs. The entry includes the value in the <code>NameID</code> element of the SAML assertion. We recommend that you use a <code>NameIDType</code> that is not associated with any personally identifiable information (PII). For example, you could instead use the Persistent Identifier (<code>urn:oasis:names:tc:SAML:2.0:nameid-format:persistent</code>).</p> </important> <p>For more information, see the following resources:</p> <ul> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_saml.html">About SAML 2.0-based Federation</a> in the <i>IAM User Guide</i>. </p> </li> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml.html">Creating SAML Identity Providers</a> in the <i>IAM User Guide</i>. </p> </li> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_create_saml_relying-party.html">Configuring a Relying Party and Claims</a> in the <i>IAM User Guide</i>. </p> </li> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-idp_saml.html">Creating a Role for SAML 2.0 Federation</a> in the <i>IAM User Guide</i>. </p> </li> </ul></p>
    fn assume_role_with_saml(
        &self,
        input: AssumeRoleWithSAMLRequest,
    ) -> RusotoFuture<AssumeRoleWithSAMLResponse, AssumeRoleWithSAMLError> {
        let mut request = SignedRequest::new("POST", "sts", &self.region, "/");
        let mut params = Params::new();

        params.put("Action", "AssumeRoleWithSAML");
        params.put("Version", "2011-06-15");
        AssumeRoleWithSAMLRequestSerializer::serialize(&mut params, "", &input);
        request.set_payload(Some(serde_urlencoded::to_string(&params).unwrap()));
        request.set_content_type("application/x-www-form-urlencoded".to_owned());

        self.client.sign_and_dispatch(request, |response| {
            if !response.status.is_success() {
                return Box::new(
                    response
                        .buffer()
                        .from_err()
                        .and_then(|response| Err(AssumeRoleWithSAMLError::from_response(response))),
                );
            }

            Box::new(response.buffer().from_err().and_then(move |response| {
                let result;

                if response.body.is_empty() {
                    result = AssumeRoleWithSAMLResponse::default();
                } else {
                    let reader = EventReader::new_with_config(
                        response.body.as_ref(),
                        ParserConfig::new().trim_whitespace(true),
                    );
                    let mut stack = XmlResponse::new(reader.into_iter().peekable());
                    let _start_document = stack.next();
                    let actual_tag_name = peek_at_name(&mut stack)?;
                    start_element(&actual_tag_name, &mut stack)?;
                    result = AssumeRoleWithSAMLResponseDeserializer::deserialize(
                        "AssumeRoleWithSAMLResult",
                        &mut stack,
                    )?;
                    skip_tree(&mut stack);
                    end_element(&actual_tag_name, &mut stack)?;
                }
                // parse non-payload
                Ok(result)
            }))
        })
    }

    /// <p><p>Returns a set of temporary security credentials for users who have been authenticated in a mobile or web application with a web identity provider. Example providers include Amazon Cognito, Login with Amazon, Facebook, Google, or any OpenID Connect-compatible identity provider.</p> <note> <p>For mobile applications, we recommend that you use Amazon Cognito. You can use Amazon Cognito with the <a href="http://aws.amazon.com/sdkforios/">AWS SDK for iOS Developer Guide</a> and the <a href="http://aws.amazon.com/sdkforandroid/">AWS SDK for Android Developer Guide</a> to uniquely identify a user. You can also supply the user with a consistent identity throughout the lifetime of an application.</p> <p>To learn more about Amazon Cognito, see <a href="https://docs.aws.amazon.com/mobile/sdkforandroid/developerguide/cognito-auth.html#d0e840">Amazon Cognito Overview</a> in <i>AWS SDK for Android Developer Guide</i> and <a href="https://docs.aws.amazon.com/mobile/sdkforios/developerguide/cognito-auth.html#d0e664">Amazon Cognito Overview</a> in the <i>AWS SDK for iOS Developer Guide</i>.</p> </note> <p>Calling <code>AssumeRoleWithWebIdentity</code> does not require the use of AWS security credentials. Therefore, you can distribute an application (for example, on mobile devices) that requests temporary security credentials without including long-term AWS credentials in the application. You also don&#39;t need to deploy server-based proxy services that use long-term AWS credentials. Instead, the identity of the caller is validated by using a token from the web identity provider. For a comparison of <code>AssumeRoleWithWebIdentity</code> with the other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <p>The temporary security credentials returned by this API consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to AWS service API operations.</p> <p>By default, the temporary security credentials created by <code>AssumeRoleWithWebIdentity</code> last for one hour. However, you can use the optional <code>DurationSeconds</code> parameter to specify the duration of your session. You can provide a value from 900 seconds (15 minutes) up to the maximum session duration setting for the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your role, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html#id_roles_use_view-role-max-session">View the Maximum Session Duration Setting for a Role</a> in the <i>IAM User Guide</i>. The maximum session duration limit applies when you use the <code>AssumeRole<em></code> API operations or the <code>assume-role</em></code> CLI commands. However the limit does not apply when you use those operations to create a console URL. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html">Using IAM Roles</a> in the <i>IAM User Guide</i>. </p> <p>The temporary security credentials created by <code>AssumeRoleWithWebIdentity</code> can be used to make API calls to any AWS service with the following exception: you cannot call the STS <code>GetFederationToken</code> or <code>GetSessionToken</code> API operations.</p> <p>(Optional) You can pass inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policies</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plain text that you use for both inline and managed session policies shouldn&#39;t exceed 2048 characters. Passing policies to this operation returns new temporary credentials. The resulting session&#39;s permissions are the intersection of the role&#39;s identity-based policy and the session policies. You can use the role&#39;s temporary credentials in subsequent AWS API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>.</p> <p>Before your application can call <code>AssumeRoleWithWebIdentity</code>, you must have an identity token from a supported identity provider and create a role that the application can assume. The role that your application assumes must trust the identity provider that is associated with the identity token. In other words, the identity provider must be specified in the role&#39;s trust policy. </p> <important> <p>Calling <code>AssumeRoleWithWebIdentity</code> can result in an entry in your AWS CloudTrail logs. The entry includes the <a href="http://openid.net/specs/openid-connect-core-1_0.html#Claims">Subject</a> of the provided Web Identity Token. We recommend that you avoid using any personally identifiable information (PII) in this field. For example, you could instead use a GUID or a pairwise identifier, as <a href="http://openid.net/specs/openid-connect-core-1_0.html#SubjectIDTypes">suggested in the OIDC specification</a>.</p> </important> <p>For more information about how to use web identity federation and the <code>AssumeRoleWithWebIdentity</code> API, see the following resources: </p> <ul> <li> <p> <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_oidc_manual.html">Using Web Identity Federation API Operations for Mobile Apps</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity">Federation Through a Web-based Identity Provider</a>. </p> </li> <li> <p> <a href="https://web-identity-federation-playground.s3.amazonaws.com/index.html"> Web Identity Federation Playground</a>. Walk through the process of authenticating through Login with Amazon, Facebook, or Google, getting temporary security credentials, and then using those credentials to make a request to AWS. </p> </li> <li> <p> <a href="http://aws.amazon.com/sdkforios/">AWS SDK for iOS Developer Guide</a> and <a href="http://aws.amazon.com/sdkforandroid/">AWS SDK for Android Developer Guide</a>. These toolkits contain sample apps that show how to invoke the identity providers, and then how to use the information from these providers to get and use temporary security credentials. </p> </li> <li> <p> <a href="http://aws.amazon.com/articles/web-identity-federation-with-mobile-applications">Web Identity Federation with Mobile Applications</a>. This article discusses web identity federation and shows an example of how to use web identity federation to get access to content in Amazon S3. </p> </li> </ul></p>
    fn assume_role_with_web_identity(
        &self,
        input: AssumeRoleWithWebIdentityRequest,
    ) -> RusotoFuture<AssumeRoleWithWebIdentityResponse, AssumeRoleWithWebIdentityError> {
        let mut request = SignedRequest::new("POST", "sts", &self.region, "/");
        let mut params = Params::new();

        params.put("Action", "AssumeRoleWithWebIdentity");
        params.put("Version", "2011-06-15");
        AssumeRoleWithWebIdentityRequestSerializer::serialize(&mut params, "", &input);
        request.set_payload(Some(serde_urlencoded::to_string(&params).unwrap()));
        request.set_content_type("application/x-www-form-urlencoded".to_owned());

        self.client.sign_and_dispatch(request, |response| {
            if !response.status.is_success() {
                return Box::new(response.buffer().from_err().and_then(|response| {
                    Err(AssumeRoleWithWebIdentityError::from_response(response))
                }));
            }

            Box::new(response.buffer().from_err().and_then(move |response| {
                let result;

                if response.body.is_empty() {
                    result = AssumeRoleWithWebIdentityResponse::default();
                } else {
                    let reader = EventReader::new_with_config(
                        response.body.as_ref(),
                        ParserConfig::new().trim_whitespace(true),
                    );
                    let mut stack = XmlResponse::new(reader.into_iter().peekable());
                    let _start_document = stack.next();
                    let actual_tag_name = peek_at_name(&mut stack)?;
                    start_element(&actual_tag_name, &mut stack)?;
                    result = AssumeRoleWithWebIdentityResponseDeserializer::deserialize(
                        "AssumeRoleWithWebIdentityResult",
                        &mut stack,
                    )?;
                    skip_tree(&mut stack);
                    end_element(&actual_tag_name, &mut stack)?;
                }
                // parse non-payload
                Ok(result)
            }))
        })
    }

    /// <p><p>Decodes additional information about the authorization status of a request from an encoded message returned in response to an AWS request.</p> <p>For example, if a user is not authorized to perform an operation that he or she has requested, the request returns a <code>Client.UnauthorizedOperation</code> response (an HTTP 403 response). Some AWS operations additionally return an encoded message that can provide details about this authorization failure. </p> <note> <p>Only certain AWS operations return an encoded authorization message. The documentation for an individual operation indicates whether that operation returns an encoded message in addition to returning an HTTP code.</p> </note> <p>The message is encoded because the details of the authorization status can constitute privileged information that the user who requested the operation should not see. To decode an authorization status message, a user must be granted permissions via an IAM policy to request the <code>DecodeAuthorizationMessage</code> (<code>sts:DecodeAuthorizationMessage</code>) action. </p> <p>The decoded message includes the following type of information:</p> <ul> <li> <p>Whether the request was denied due to an explicit deny or due to the absence of an explicit allow. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_evaluation-logic.html#policy-eval-denyallow">Determining Whether a Request is Allowed or Denied</a> in the <i>IAM User Guide</i>. </p> </li> <li> <p>The principal who made the request.</p> </li> <li> <p>The requested action.</p> </li> <li> <p>The requested resource.</p> </li> <li> <p>The values of condition keys in the context of the user&#39;s request.</p> </li> </ul></p>
    fn decode_authorization_message(
        &self,
        input: DecodeAuthorizationMessageRequest,
    ) -> RusotoFuture<DecodeAuthorizationMessageResponse, DecodeAuthorizationMessageError> {
        let mut request = SignedRequest::new("POST", "sts", &self.region, "/");
        let mut params = Params::new();

        params.put("Action", "DecodeAuthorizationMessage");
        params.put("Version", "2011-06-15");
        DecodeAuthorizationMessageRequestSerializer::serialize(&mut params, "", &input);
        request.set_payload(Some(serde_urlencoded::to_string(&params).unwrap()));
        request.set_content_type("application/x-www-form-urlencoded".to_owned());

        self.client.sign_and_dispatch(request, |response| {
            if !response.status.is_success() {
                return Box::new(response.buffer().from_err().and_then(|response| {
                    Err(DecodeAuthorizationMessageError::from_response(response))
                }));
            }

            Box::new(response.buffer().from_err().and_then(move |response| {
                let result;

                if response.body.is_empty() {
                    result = DecodeAuthorizationMessageResponse::default();
                } else {
                    let reader = EventReader::new_with_config(
                        response.body.as_ref(),
                        ParserConfig::new().trim_whitespace(true),
                    );
                    let mut stack = XmlResponse::new(reader.into_iter().peekable());
                    let _start_document = stack.next();
                    let actual_tag_name = peek_at_name(&mut stack)?;
                    start_element(&actual_tag_name, &mut stack)?;
                    result = DecodeAuthorizationMessageResponseDeserializer::deserialize(
                        "DecodeAuthorizationMessageResult",
                        &mut stack,
                    )?;
                    skip_tree(&mut stack);
                    end_element(&actual_tag_name, &mut stack)?;
                }
                // parse non-payload
                Ok(result)
            }))
        })
    }

    /// <p>Returns details about the IAM identity whose credentials are used to call the API.</p>
    fn get_caller_identity(
        &self,
        input: GetCallerIdentityRequest,
    ) -> RusotoFuture<GetCallerIdentityResponse, GetCallerIdentityError> {
        let mut request = SignedRequest::new("POST", "sts", &self.region, "/");
        let mut params = Params::new();

        params.put("Action", "GetCallerIdentity");
        params.put("Version", "2011-06-15");
        GetCallerIdentityRequestSerializer::serialize(&mut params, "", &input);
        request.set_payload(Some(serde_urlencoded::to_string(&params).unwrap()));
        request.set_content_type("application/x-www-form-urlencoded".to_owned());

        self.client.sign_and_dispatch(request, |response| {
            if !response.status.is_success() {
                return Box::new(
                    response
                        .buffer()
                        .from_err()
                        .and_then(|response| Err(GetCallerIdentityError::from_response(response))),
                );
            }

            Box::new(response.buffer().from_err().and_then(move |response| {
                let result;

                if response.body.is_empty() {
                    result = GetCallerIdentityResponse::default();
                } else {
                    let reader = EventReader::new_with_config(
                        response.body.as_ref(),
                        ParserConfig::new().trim_whitespace(true),
                    );
                    let mut stack = XmlResponse::new(reader.into_iter().peekable());
                    let _start_document = stack.next();
                    let actual_tag_name = peek_at_name(&mut stack)?;
                    start_element(&actual_tag_name, &mut stack)?;
                    result = GetCallerIdentityResponseDeserializer::deserialize(
                        "GetCallerIdentityResult",
                        &mut stack,
                    )?;
                    skip_tree(&mut stack);
                    end_element(&actual_tag_name, &mut stack)?;
                }
                // parse non-payload
                Ok(result)
            }))
        })
    }

    /// <p>Returns a set of temporary security credentials (consisting of an access key ID, a secret access key, and a security token) for a federated user. A typical use is in a proxy application that gets temporary security credentials on behalf of distributed applications inside a corporate network. You must call the <code>GetFederationToken</code> operation using the long-term security credentials of an IAM user. As a result, this call is appropriate in contexts where those credentials can be safely stored, usually in a server-based application. For a comparison of <code>GetFederationToken</code> with the other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <note> <p>You can create a mobile-based or browser-based app that can authenticate users using a web identity provider like Login with Amazon, Facebook, Google, or an OpenID Connect-compatible identity provider. In this case, we recommend that you use <a href="http://aws.amazon.com/cognito/">Amazon Cognito</a> or <code>AssumeRoleWithWebIdentity</code>. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity">Federation Through a Web-based Identity Provider</a>.</p> </note> <p>You can also call <code>GetFederationToken</code> using the security credentials of an AWS account root user, but we do not recommend it. Instead, we recommend that you create an IAM user for the purpose of the proxy application. Then attach a policy to the IAM user that limits federated users to only the actions and resources that they need to access. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html">IAM Best Practices</a> in the <i>IAM User Guide</i>. </p> <p>The temporary credentials are valid for the specified duration, from 900 seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours). The default is 43,200 seconds (12 hours). Temporary credentials that are obtained by using AWS account root user credentials have a maximum duration of 3,600 seconds (1 hour).</p> <p>The temporary security credentials created by <code>GetFederationToken</code> can be used to make API calls to any AWS service with the following exceptions:</p> <ul> <li> <p>You cannot use these credentials to call any IAM API operations.</p> </li> <li> <p>You cannot call any STS API operations except <code>GetCallerIdentity</code>.</p> </li> </ul> <p> <b>Permissions</b> </p> <p>You must pass an inline or managed <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">session policy</a> to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plain text that you use for both inline and managed session policies shouldn't exceed 2048 characters.</p> <p>Though the session policy parameters are optional, if you do not pass a policy, then the resulting federated user session has no permissions. The only exception is when the credentials are used to access a resource that has a resource-based policy that specifically references the federated user session in the <code>Principal</code> element of the policy. When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access_policies.html#policies_session">Session Policies</a> in the <i>IAM User Guide</i>. For information about using <code>GetFederationToken</code> to create temporary security credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getfederationtoken">GetFederationToken—Federation Through a Custom Identity Broker</a>. </p>
    fn get_federation_token(
        &self,
        input: GetFederationTokenRequest,
    ) -> RusotoFuture<GetFederationTokenResponse, GetFederationTokenError> {
        let mut request = SignedRequest::new("POST", "sts", &self.region, "/");
        let mut params = Params::new();

        params.put("Action", "GetFederationToken");
        params.put("Version", "2011-06-15");
        GetFederationTokenRequestSerializer::serialize(&mut params, "", &input);
        request.set_payload(Some(serde_urlencoded::to_string(&params).unwrap()));
        request.set_content_type("application/x-www-form-urlencoded".to_owned());

        self.client.sign_and_dispatch(request, |response| {
            if !response.status.is_success() {
                return Box::new(
                    response
                        .buffer()
                        .from_err()
                        .and_then(|response| Err(GetFederationTokenError::from_response(response))),
                );
            }

            Box::new(response.buffer().from_err().and_then(move |response| {
                let result;

                if response.body.is_empty() {
                    result = GetFederationTokenResponse::default();
                } else {
                    let reader = EventReader::new_with_config(
                        response.body.as_ref(),
                        ParserConfig::new().trim_whitespace(true),
                    );
                    let mut stack = XmlResponse::new(reader.into_iter().peekable());
                    let _start_document = stack.next();
                    let actual_tag_name = peek_at_name(&mut stack)?;
                    start_element(&actual_tag_name, &mut stack)?;
                    result = GetFederationTokenResponseDeserializer::deserialize(
                        "GetFederationTokenResult",
                        &mut stack,
                    )?;
                    skip_tree(&mut stack);
                    end_element(&actual_tag_name, &mut stack)?;
                }
                // parse non-payload
                Ok(result)
            }))
        })
    }

    /// <p>Returns a set of temporary credentials for an AWS account or IAM user. The credentials consist of an access key ID, a secret access key, and a security token. Typically, you use <code>GetSessionToken</code> if you want to use MFA to protect programmatic calls to specific AWS API operations like Amazon EC2 <code>StopInstances</code>. MFA-enabled IAM users would need to call <code>GetSessionToken</code> and submit an MFA code that is associated with their MFA device. Using the temporary security credentials that are returned from the call, IAM users can then make programmatic calls to API operations that require MFA authentication. If you do not supply a correct MFA code, then the API returns an access denied error. For a comparison of <code>GetSessionToken</code> with the other API operations that produce temporary credentials, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html">Requesting Temporary Security Credentials</a> and <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#stsapi_comparison">Comparing the AWS STS API operations</a> in the <i>IAM User Guide</i>.</p> <p>The <code>GetSessionToken</code> operation must be called by using the long-term AWS security credentials of the AWS account root user or an IAM user. Credentials that are created by IAM users are valid for the duration that you specify. This duration can range from 900 seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours), with a default of 43,200 seconds (12 hours). Credentials based on account credentials can range from 900 seconds (15 minutes) up to 3,600 seconds (1 hour), with a default of 1 hour. </p> <p>The temporary security credentials created by <code>GetSessionToken</code> can be used to make API calls to any AWS service with the following exceptions:</p> <ul> <li> <p>You cannot call any IAM API operations unless MFA authentication information is included in the request.</p> </li> <li> <p>You cannot call any STS API <i>except</i> <code>AssumeRole</code> or <code>GetCallerIdentity</code>.</p> </li> </ul> <note> <p>We recommend that you do not call <code>GetSessionToken</code> with AWS account root user credentials. Instead, follow our <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/best-practices.html#create-iam-users">best practices</a> by creating one or more IAM users, giving them the necessary permissions, and using IAM users for everyday interaction with AWS. </p> </note> <p>The credentials that are returned by <code>GetSessionToken</code> are based on permissions associated with the user whose credentials were used to call the operation. If <code>GetSessionToken</code> is called using AWS account root user credentials, the temporary credentials have root user permissions. Similarly, if <code>GetSessionToken</code> is called using the credentials of an IAM user, the temporary credentials have the same permissions as the IAM user. </p> <p>For more information about using <code>GetSessionToken</code> to create temporary credentials, go to <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_getsessiontoken">Temporary Credentials for Users in Untrusted Environments</a> in the <i>IAM User Guide</i>. </p>
    fn get_session_token(
        &self,
        input: GetSessionTokenRequest,
    ) -> RusotoFuture<GetSessionTokenResponse, GetSessionTokenError> {
        let mut request = SignedRequest::new("POST", "sts", &self.region, "/");
        let mut params = Params::new();

        params.put("Action", "GetSessionToken");
        params.put("Version", "2011-06-15");
        GetSessionTokenRequestSerializer::serialize(&mut params, "", &input);
        request.set_payload(Some(serde_urlencoded::to_string(&params).unwrap()));
        request.set_content_type("application/x-www-form-urlencoded".to_owned());

        self.client.sign_and_dispatch(request, |response| {
            if !response.status.is_success() {
                return Box::new(
                    response
                        .buffer()
                        .from_err()
                        .and_then(|response| Err(GetSessionTokenError::from_response(response))),
                );
            }

            Box::new(response.buffer().from_err().and_then(move |response| {
                let result;

                if response.body.is_empty() {
                    result = GetSessionTokenResponse::default();
                } else {
                    let reader = EventReader::new_with_config(
                        response.body.as_ref(),
                        ParserConfig::new().trim_whitespace(true),
                    );
                    let mut stack = XmlResponse::new(reader.into_iter().peekable());
                    let _start_document = stack.next();
                    let actual_tag_name = peek_at_name(&mut stack)?;
                    start_element(&actual_tag_name, &mut stack)?;
                    result = GetSessionTokenResponseDeserializer::deserialize(
                        "GetSessionTokenResult",
                        &mut stack,
                    )?;
                    skip_tree(&mut stack);
                    end_element(&actual_tag_name, &mut stack)?;
                }
                // parse non-payload
                Ok(result)
            }))
        })
    }
}

#[cfg(test)]
mod protocol_tests {

    extern crate rusoto_mock;

    use self::rusoto_mock::*;
    use super::*;
    use rusoto_core::Region as rusoto_region;

    #[test]
    fn test_parse_error_sts_get_session_token() {
        let mock_response = MockResponseReader::read_response(
            "test_resources/generated/error",
            "sts-get-session-token.xml",
        );
        let mock = MockRequestDispatcher::with_status(400).with_body(&mock_response);
        let client = StsClient::new_with(mock, MockCredentialsProvider, rusoto_region::UsEast1);
        let request = GetSessionTokenRequest::default();
        let result = client.get_session_token(request).sync();
        assert!(!result.is_ok(), "parse error: {:?}", result);
    }

    #[test]
    fn test_parse_valid_sts_get_session_token() {
        let mock_response = MockResponseReader::read_response(
            "test_resources/generated/valid",
            "sts-get-session-token.xml",
        );
        let mock = MockRequestDispatcher::with_status(200).with_body(&mock_response);
        let client = StsClient::new_with(mock, MockCredentialsProvider, rusoto_region::UsEast1);
        let request = GetSessionTokenRequest::default();
        let result = client.get_session_token(request).sync();
        assert!(result.is_ok(), "parse error: {:?}", result);
    }
}