[−][src]Struct rusoto_ec2::CreateNetworkAclEntryRequest
Fields
cidr_block: Option<String>
The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24
).
dry_run: Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation
. Otherwise, it is UnauthorizedOperation
.
egress: bool
Indicates whether this is an egress rule (rule is applied to traffic leaving the subnet).
icmp_type_code: Option<IcmpTypeCode>
ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.
ipv_6_cidr_block: Option<String>
The IPv6 network range to allow or deny, in CIDR notation (for example 2001:db8:1234:1a00::/64
).
network_acl_id: String
The ID of the network ACL.
port_range: Option<PortRange>
TCP or UDP protocols: The range of ports the rule applies to. Required if specifying protocol 6 (TCP) or 17 (UDP).
protocol: String
The protocol number. A value of "-1" means all protocols. If you specify "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), traffic on all ports is allowed, regardless of any ports or ICMP types or codes that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless of any that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv6 CIDR block, you must specify an ICMP type and code.
rule_action: String
Indicates whether to allow or deny the traffic that matches the rule.
rule_number: i64
The rule number for the entry (for example, 100). ACL entries are processed in ascending order by rule number.
Constraints: Positive integer from 1 to 32766. The range 32767 to 65535 is reserved for internal use.
Trait Implementations
impl PartialEq<CreateNetworkAclEntryRequest> for CreateNetworkAclEntryRequest
[src]
fn eq(&self, other: &CreateNetworkAclEntryRequest) -> bool
[src]
fn ne(&self, other: &CreateNetworkAclEntryRequest) -> bool
[src]
impl Default for CreateNetworkAclEntryRequest
[src]
impl Clone for CreateNetworkAclEntryRequest
[src]
fn clone(&self) -> CreateNetworkAclEntryRequest
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Debug for CreateNetworkAclEntryRequest
[src]
Auto Trait Implementations
impl Send for CreateNetworkAclEntryRequest
impl Sync for CreateNetworkAclEntryRequest
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
impl<T, U> TryFrom for T where
T: From<U>,
[src]
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
impl<T> Erased for T
impl<T> Same for T
type Output = T
Should always be Self